Audited Supplier
SRRE7-100
Low Voltage Circuit Breakers
Electric Type
High-Speed Circuit Breaker
Air
Fixed
ISO9001-2000, CE, CB, CCC
230 / 400VAC
Electromagnetic
1p+N, 3p+N
50/60Hz
LONGROAD/OEM
Box
China
Product Description
1. General
1.1 Function
-Control electric circuits.
-Protect people against indirect contacts and additional protection against direct contacts.
-Protect installations against fire hazard due to insulation faults.
-Residual current circuit breakers are used in housing, tertiary sector and industry.
1.2 Selection
Detectable wave form
-AC class :Tripping is ensured for slowly increasing sinusoidal AC residual currents.
-A class :Tripping is ensured for sinusoidal AC residual currents and for pulsed DC residual currents, whether applied suddenly or increasing slowly.
Tripping sensitivity
10mA - precision instrument leakage protection and bathroom use.
30mA - additional protection against direct contact.
300mA - protection against indirect contacts, as well as fire hazard.
Tripping time
Instantaneous
It ensures instantaneous tripping (without time-delay).
2.Technical data
2.Technical data
| Standard | IEC/EN 61008-1 | ||
Electrical features | Type (wave form of the earth leakage sensed) | AC, A | |
| Rated current In | A | 16, 25, 32, 40, 63 | |
| Poles | 1P+N, 3P+N | ||
| Rated voltage Ue | V | 230/400~240/415,110/200~127/220 | |
| Rated sensitivity I△n | A | 0.01 (Only for 1P+N 16A, 25A),0.03,0.3 | |
| Insulation voltage Ui | V | 500 | |
| Rated residual making and breaking capacity I△m | A | 500 (In=16A/25A/32A/40A) | |
| 630 (In=63A) | |||
| Short-circuit current Inc=I△c | A | 6000/10000 | |
| SCPD fuse | A | 10000 | |
| break time under I△n | s | ≤0.1 | |
| Rated frequency | Hz | 50/60 | |
| Rated impulse withstand voltage(1.2/50) Uimp | V | 6000 | |
| Dielectric test voltage at ind. Freq. for 1 min | kV | 2 | |
| Pollution degree | 2 | ||
Mechanical features | Electrical life | 2, 000 | |
| Mechanical life | 2, 000 | ||
| Fault current indicator | Yes | ||
| Protection degree | IP20 | ||
| Ambient temperature (with daily average≤35ºC) | ºC | -5...+40 | |
| Storage temperation | ºC | -25...+70 | |
Installation | Terminal connection type Terminal size top/bottom for cable Terminal size top/bottom for busbar | mm2 | Cable/U-type busbar/Pin-type busbar 25 |
| AWG mm2 | 18-3 10 | ||
| AWG | 18-8 | ||
| Tightening torque | N·m | 2.5 | |
| In-Ibs. | 22 | ||
| Mounting | On DIN rail EN 60715 (35mm) by means of fast clip device | ||
| Connection | From top and bottom |
