Audited Supplier
waterproof connector
3 Pins
Power
CE, ISO 9001, RoHS
Copper
AC/DC
IP67
Nylon PA66
Gold Plated Brass
300V
25A
1.0-2.5mmsq
AHUA
Carton
male to female inline connector
Shenzhen of China
8536690000
Product Description
3pin Power Wire Male Female Waterproof Connector For Feeding System 
This is assembly type waterproof connector that is male to female self-locking plug and sockets.
The terminal of waterproof connector is screw lug, which is easy for wiring operation.
1. plastic material: Nyon PA66
2. metal material: gold plated brass
3. cable gland/O-ring material: silicone rubber
Male: AH-K20-2003MMZ01222
Female: AH-K20-2003FFZ01222
The terminal of waterproof connector is screw lug, which is easy for wiring operation.
1. plastic material: Nyon PA66
2. metal material: gold plated brass
3. cable gland/O-ring material: silicone rubber
Male: AH-K20-2003MMZ01222
Female: AH-K20-2003FFZ01222
The connector is assembled with components including waterproof nut, cable gland, enclosure, coupling nut, O-ring, connector core.
The connector is length about 98mm, and wide about 30mm. This connector carrys power up to 20A/300V, the wire gauge is 1.0-2.5mm², and its cable OD range is 6-13mm.
The connector is length about 98mm, and wide about 30mm. This connector carrys power up to 20A/300V, the wire gauge is 1.0-2.5mm², and its cable OD range is 6-13mm.
How to order waterproof connector?
Once confirm the waterproof connector type, you need to provide the power details and wire details, such as:
1. contacts number, eg: 3pin;
2. working ampere and voltage, eg: 15A/300V;
3. wire gauge and cable jacket OD, eg: 2.5mm², OD10mm;
4. connection type, eg: solder type or screw type.
Once confirm the waterproof connector type, you need to provide the power details and wire details, such as:
1. contacts number, eg: 3pin;
2. working ampere and voltage, eg: 15A/300V;
3. wire gauge and cable jacket OD, eg: 2.5mm², OD10mm;
4. connection type, eg: solder type or screw type.
How do do wiring operation?
1. take off components waterproof nut, cable gland and enclosure;
2. do wire stripped about 10mm;
3. put the cable through waterproof nut, cable gland, enclosure orderly;
4. using a fine screwdriver to tighten up the wire on terminals;
5. assemble all components, that is ready.
1. take off components waterproof nut, cable gland and enclosure;
2. do wire stripped about 10mm;
3. put the cable through waterproof nut, cable gland, enclosure orderly;
4. using a fine screwdriver to tighten up the wire on terminals;
5. assemble all components, that is ready.
