Audited Supplier
TS06P-4F-2F
Full-Duplex & Half-Duplex
Ethernet Switch
10/100Mbps
≦8
Data Provided Over Pairs Over 1/2and 3/6
up to 100m
802.3af, 802.3at, Max 30W Output
10/100Mbps
Ethernet
Store-and-Forward
PHYNAM
Unit Package Size: 374*232*82mm
CE/EMC, CE/LVD, FCC Certification
Dongguan Guangdong China
85176219
Product Description
4 Port 10/100Mbps POE Ethernet switch
TS06P-4F-2F
Product Description:The TS06P-4F-2F is a 10/100Mbps unmanaged POE switch, which provides four DATA+POE ports and two pure data port. Among them, port 1 support HI-POE max 60w output and the 2-4 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps.
The TS06P-4F-2F is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.
The TS06P-4F-2F adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-4 ports cannot communicate with each other, only through port 5-6 to output data. This mode can effectively suppress the generation of broadcast storms.
Product Features:
- Ports 1 max 60w POE output
- Support POEdog function,When a port goes down or the response becomes slow, the port can be automatically restarted to reactivate the PD device
- Comply with IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3q, 802.3af/at specifications.
- 2*10/100Mbps uplink ports, support for auto-negotiation.
- 4*10/100Mbps POE ports, support 802.3af/at standard, maximum 30w power output.
- internal 80w power supply.
- Adopt Store-and-Forward transmission mode.
- Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
- 2K Mac address table
- One DIP switch supports port isolation setting and max 250m POE transmission(CCTV mode)
- Port status LEDs
Datasheet
| Model | TS06P-4F-2F | |
| Port | ||
| 100M Uplink | 2 | |
| 100M POE | 4 | |
| Function | Exchange Mechanism | Store-and-forward |
| Exchange Capacity | 1.6G | |
| MAC | 2K | |
| Environmental | Working Temperature:0-45ºC Storage temperature :-40-+70ºC | |
| Working Humidity :10%-90% RH non-condensing Storage Humidity:5%-90% RH non-condensing | ||
| POE | IEEE802.3af/at/HI-POE, MAX 60W(port1), total power budget 80W | |
| power | AC input 100~240V 50~60Hz internal power supply | |
| Network protocol | IEEE 802.3X IEEE 802.3i 10BASE-TX IEEE 802.3u 100BASE-TX IEEE 802.3af /IEEE 802.3at/HI-POE IEEE 802.3x Flow control | |
| Default Mode | Common switch | |
| Feature | Support VLAN, transmission 250 meter | |
| Speed | Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex | |
| Network Media | 10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(≤100m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(≤100m) | |
| Physical Specifications | products size:190mm*130mm*32mm package size:300mm*175mm*100mm 0.9kg | |
