Audited Supplier
1.Widely used for measuring differential pressure (or pressure), level, density of liquid, gas or steam and convert the value of above into current signal output or digital protocol output.
2.The pressures are directly applied to the isolating diaphragm that provide isolation and resistance against process fluid corrosion.
3.Being microprocessor based, the electronic circuit is extremely versatile and accurate.
4.Combined with the sensor precision, it provides the high accuracy and range ability.
5.Transmitter performance is improved by continuous monitoring of the sensor temperature and corresponding corrections.
6.A local display permits easy reading and writing of data.
| Medium | 12~45V DC, generally 24V DC |
| Measuring Range | 0~0.1kPa to 0~40MPa |
| Output | 4~20mA DC+HART protocol |
| Accuracy | ±0.1%FS |
| Range and null point | Adjustable |
| Power Supply | 12~45V DC, generally 24V DC |
| Protection | IP65 |
| Storage Temperature | -40~+125°C |
| Overload Limit | 150%-200% of rated range |
| Load Resistance | 750Ω(See below diagram 1 for load characteristic ) |
| Relative Humidity | 5~95% |
| Converter housing | Low copper cast aluminum alloy with Polyurethane paint |
| Fill Fluid | Silicon / Fluorine Oil |
| Process Connections | 1/2NPT, 1/4NPT |
| Static pressure | 4, 10, 25, 32Mpa |
| Mounting | Directly supported by piping or optionally with mounting bracket for 2" pipes or with direct or remote seals. 3-way valve |
| Maximum positive shift | 500% of minimum adjusting span |
| maximum negative shift | 600% of minimum adjusting span |
FAQ:
Q1: What's your business range?
A: We manufacture PH/ORP/EC/DO/Chlorine/Turbinity meter and provide dosing pump, diaphragm pump,dosing system, pressure instrument, flow meter, level meter, dosing system and so on.
Q2: How about the quality of the managements?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you.
Q3: Can you offer OEM or design services?
A: Yes, we have our own design department and production tools. We can make OEM products according to your requirements.
Q4: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
Q5: How about warranty?
A: 12 months warranty.
