Audited Supplier
The specially designed drilling mud hydro-cyclone units are primarily used for removal of sand-size and silt-size particles from returned drilling fluids. Abrasion resistance polyurethane hydro-cyclones are applied to the unit. The unit can be stand alone for use or assembled above shale shaker through pre-designed connectors. The number of desander and desilter cones is customizable according to the real conditions.
4″ drilling mud desilter hydrocyclones
• Silt-sized solids removal (12 ~ 74 microns);
• 100% polyurethane hydrocyclone;
• 80 gpm per cone at 75 feet of head;
• Variable size apex inserts;
• Available with and without a ramp in the feed inlet;
• Flexible fast connection is available for user to assemble;
• Compact design, small footprint.
| Model | Capacity (m3/h) | Desilter Cone Size (in) | Number of Desilter (ea) | Working Pressure (Mpa) | Feeding/Output (in) |
| 8N | 120 | 4 | 8 | 0.25-0.4 | 6 / 8 |
| 12N | 240 | 4 | 12 | 0.25-0.4 | 6 / 8 |
| 16N | 360 | 4 | 16 | 0.25-0.4 | 6 / 8 |
| Model | Capacity (m3/h) | Desander Cone Size (in) | Number of Desander (ea) | Desilter Cone Size (in) | Number of Desilter (ea) | Working Pressure (Mpa) | Feeding/Output (in) |
| 1S8N | 120 | 10 | 1 | 4 | 8 | 0.25-0.4 | 6 / 8 |
| 2S12N | 240 | 10 | 2 | 4 | 12 | 0.25-0.4 | 6 / 8 |
| 3S16N | 360 | 10 | 3 | 4 | 16 | 0.25-0.4 | 6 / 8 |
KES Separation with perfect ERP management system, numerical control equipment and other precision machining equipment and a good business philosophy, to reduce the material loss, achieve the optimization of resource, improve the production efficiency and product quality, production management strictly follow international quality specification requirements, have excellent service team, and thus can provide higher quality products and services to lower cost.
