Audited Supplier
FSD
Support
1 Year
Double Cylinder Hydraulic Lift
≥5T
Hydraulic
CE, ISO
2
Planer-type
Small Shear Type
New
Yzk
Two Post
220V/380V
Standard Packing
3700*500*810mm
China
8425429000
Product Description
YZK Two-Post Vehicle Lift - A Must-Have For Your Repair Shop
Two-post lift is a special mechanical lifting equipment commonly used in automobile repair and maintenance units. Two-post lift is the main type of lift and is widely used in the repair and maintenance of small cars such as sedans.
Technical Parameters
Product Features
Product Notes
1. The load distribution during use should comply with the rated load distribution of the support arm specified in the instruction manual.
2. Before lifting the vehicle, the height of each pallet should be adjusted to keep the support points on the same horizontal plane.
3 The skirt or beam of the vehicle to be lifted must be placed in the center of the pallet, and the center of gravity of the vehicle should be located at the center of the support surface as much as possible.
4. After the pallet is in place, the lift can be started only after confirming that the support arm is positioned reliably.
Two-post lift is a special mechanical lifting equipment commonly used in automobile repair and maintenance units. Two-post lift is the main type of lift and is widely used in the repair and maintenance of small cars such as sedans.
Technical Parameters
| Lifting Capacity | 4000kg | Width Between Pillars | 2750mm |
| Lifting Height | 1800mm | Power Supply | 220V/380V |
| Lifting Time | 45-55s | Net Weight | 550kg |
| Total Height | 3600mm | Packing Size | 3650*300*820mm |
Product Features
Product Notes
1. The load distribution during use should comply with the rated load distribution of the support arm specified in the instruction manual.
2. Before lifting the vehicle, the height of each pallet should be adjusted to keep the support points on the same horizontal plane.
3 The skirt or beam of the vehicle to be lifted must be placed in the center of the pallet, and the center of gravity of the vehicle should be located at the center of the support surface as much as possible.
4. After the pallet is in place, the lift can be started only after confirming that the support arm is positioned reliably.
