Audited Supplier
BT-YG935-25/U35D4650-R1
Telephone, Workstation, Mobile phone
Wireless
GSM
Data
ISO
New
BOOSTEL
Carton
160*100*20.5mm
Shenzhen
Product Description
GSM900Mhz Power Amplifier Module 40W
BT-YG935-25/U35D4650-R1
PIN 2 -->RS485B;
PIN 3 -->GND;
PIN 4 -->GND;
PIN 5 -->NC;
PIN 6 -->+28V;
C. Monitoring Functions
D. Dimensions
BT-YG935-25/U35D4650-R1
| Items | Downlink | Uplink |
| Frequency rang(MHz) | 935-960 | 890-915 |
| Output Power@(25ºC) | 46±1dBm | |
| ALC | Output Power keep Max.Output Power±1.5dB @(20dB>Input signal increased>10dB) | |
| Gain(25ºC) | ≤50±3dB | ≤35±3dB |
| Gain Adjustable rang | ≥30dB | |
| Step of Gain Adjustable | ≤1dB | |
| Error of Gain Adjustable | When Gain adjustable rang≤20dB Total error≤±1dB @ 0~20dB | |
| When Gain adjustable rang>20dB Total error ≤ ±1.5dB @>20dB | ||
| IMD3 | ≤-45dBc | |
| In Band Ripple | ≤3dB | |
| Frequency Error | ≤0.01ppm | |
| VSWR | ≤1.5 | |
| Noise Figure | ≤3 | |
| Group delay time | ≤1μs | |
| Max. Input Power Without Damage | +10dBm(CW) | -10dBm |
| Power Supply | +28V; ≤5A | |
| Power amplifier efficiency | ≥30% | |
| Operating Temperature | -25~+55ºC | |
A. POWER-6 Connector for Power Supply& Monitor,Pin definition:
PIN 1 -->RS485A; PIN 2 -->RS485B;
PIN 3 -->GND;
PIN 4 -->GND;
PIN 5 -->NC;
PIN 6 -->+28V;
B. RF Connector: SMA-50KFD
C. Monitoring Functions
- Module address(default=0, settable);
- PA setup function: PA=ON/OFF, ALC, ATT;
- PA Query function: Working status(on/off,input/output, Revers power, Temperature, VSWR, ATT, ALC, PA Input power,or LNA output power), Alarm(over Temperature,VSWR, PA Fault);
- Over Temperature Alarm:Alarm threshold +85ºC, meanwhile switch off PA, When Temperature lower to +80ºC, switch on PA automatically.
- PA Fault Alarm: Low gain Alarm;
- Amplifier temperature detection: Temperature detection rang including but not limited -40ºC~+85ºC, Detection accuracy<±3ºC;
- PA Forward Power detection: Detect total power, Modulated signal test, detection rang >20dBm, Detection accuracy<±2dBm;
- PA Revers Power detection: Detect total power, Modulated signal test detection rang >20dBm, Detection accuracy<±2dBm;
- PA Input power detection: Detect total power, Modulated signal test detection rang>15dBm, Detection accuracy<±2dBm;
- LNA Setup: ATT
- LNA Query: ATT
D. Dimensions
