E33 10K-400KVA
KEY FEATURES
- Low Frequency Three phase On-line Double Conversion Industry UPS 10KVA--400KVA
- 220VAC 3HP+N+G, 110V/208VAC 3HP+G optional
- DSP Controlled, IGBT inverter, Cold start, Auto Resume technology
- Setable UPS/ECO/INVERTER working mode
- 7inche touch panel, display parameter, Event log and set UPS work mode
- Full protection,overload,over voltage,short circuit,over temperature etc.
- With RS-232, RS485 Dry Contactor communication, option
- With Static bypass and manual maintenance bypass
- Option EPO function, parallel redundancy, input harmonic filter or 12 pulse wave rectifier
| Mode | E33-10K | E33-15K | E33-20K | E33-30K | E33-40K | E33-50K | E33-60K | E33-80K | E33-100K | E33-120K | E33-160K | E33-200K | E33-250K | E33-300K | E33-400K | |
| Nominal Capacity | KVA | 10 | 15 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 | 200 | 250 | 300 | 400 |
| KW | 8 | 12 | 16 | 24 | 32 | 40 | 48 | 64 | 80 | 96 | 128 | 160 | 200 | 240 | 320 | |
| Rectifiter Input | Phase Number | Three Phase | ||||||||||||||
| Input Power Factor | Standard >= 0.9 ( 6pulse Rectifier+Filter ), Optional >= 0.96 ( 12pulse Rectifier+Filter) | |||||||||||||||
| Input Voltage | 220 3P+N+P,110V/208VAC( 120V/220VAC ) optional | |||||||||||||||
| Input Frequency | 45-65HZ, 50/60Hz Auto | |||||||||||||||
| Waveform | Sine Wave | |||||||||||||||
| THDi | Total Harmonic Distortion, 6pulse Rectifier<30%, Optional 12pulse Rectifier & Filter<5% | |||||||||||||||
| Soft Start | 0-100% 10 seconds | |||||||||||||||
| Charging | Charge Mode | Constant current, then constant voltage, charge with temperature compensation, automaticswitch Between Equalized charging and Float charging, | ||||||||||||||
| Charging Time (Standard) | 12Hours | |||||||||||||||
| Folat Charging Voltage | 32*13.5V For 12VDC,setable | 40*13.5V For 12VDC,setable | ||||||||||||||
| Equalized Charging Voltage | 32*14.5V For 12VDC,setable | 40*14.5V For 12VDC,setable | ||||||||||||||
| Temeperature Compensation Voltage | -3mV/ºC/cell | |||||||||||||||
| Charging Power | 20% of rated capacity | |||||||||||||||
| Charging Current | 0.2C, based on Battery Capacity setup | |||||||||||||||
| Battery | Type | Lead Acid or Lithium | ||||||||||||||
| Capacity | 7~999AH settable (Configurate Battery Capacity according to Back-up Time) | |||||||||||||||
| Battery Number | 32units 12V or 192units 2V batteries | 40units 12V or 240units 2V batteries | ||||||||||||||
| Battery Voltage | 384VDC | 480VDC | ||||||||||||||
| Invertor Ouput | Phase Number | Three Phase | ||||||||||||||
| Rated Power | Rated capacity*0.8 | |||||||||||||||
| Nominal Voltage | 220/380VAC (230V/400VAC or 240V/415VAC) 3P+N; 110V/208VAC( 120V/220VAC or 277V/480VAC ) option,± 1%, adjustable by Monitor | |||||||||||||||
| Output Voltage Stability | ±1%( Stable load), ±3%( fluctuant load) | |||||||||||||||
| Frequency Stability | 50Hz 60Hz<±0.5% | |||||||||||||||
| Output Waveform Distortion Degree | Pure Sine Wave, Linear Load< 3%, Non-Linear Load<5% | |||||||||||||||
| Dynamic Feature | Instant voltage<±5% ( from 0 to100% ), Instant recover time<10ms | |||||||||||||||
| Factor of Wave Crest | >3:1 | |||||||||||||||
| Unbalance Load Voltage | Balance Load ≤ 1%, 100% unbalance load ≤ 3% | |||||||||||||||
| Overload Protection | At 110% load 300Min, At 125% load ≥ 10Min, AT 150% load ≥ 1Min | |||||||||||||||
| Invertor Efficiency | >92%(full load) | |||||||||||||||
| Bypass | Phase Number | 3 phase+N | ||||||||||||||
| Input Nominal Voltage | 220/380VAC (230V/400VAC or 240V/415VAC) | |||||||||||||||
| 110V/208VAC( 120V/220VAC or 277V/480VAC )optional | ||||||||||||||||
| Output Nominal Voltage | 220/380VAC (230V/400VAC or 240V/415VAC) | |||||||||||||||
| 110V/208VAC( 120V/220VAC or 277V/480VAC ) optional | ||||||||||||||||
| Switching Time | 0ms(adopted static switch) | |||||||||||||||
| Protection Function | Input Protection | Input voltage, frequency over limited protection, Phase fault, Phase lack | ||||||||||||||
| Output Prorection | Over current, short circuit, over voltage, low voltage | |||||||||||||||
| Battery Protection | Over charge, over-discharge protection | |||||||||||||||
| Overheat Protection | Environment over temperature protection, inverter over temperature protection | |||||||||||||||
| Hardware Fault Protection | Assistant power abnormal, breaker cut off, breaker overload, power devices over current/over voltage etc protection | |||||||||||||||
| System Parameters | Work Environment | Temp: 0~40ºC, relative Humidity: 0%~95% | ||||||||||||||
| Cooling Method | Forced cooling | |||||||||||||||
| Anti-surge Capacity | 10/700μS, 5KV; 8/20μS, 20KA | |||||||||||||||
| Communitation Interface | With RS232/ RS485/ dry contact, Option | |||||||||||||||
| Parallel Operation | Max 8 units in parallel mode, Tandem hot backup or parallel connection | |||||||||||||||
| Protection Level | IP20 | |||||||||||||||
| Safety Performance | EPO Option | |||||||||||||||
| Noise(Db) | 48-54 | 53-60 | 53-62 | 54-65 | ||||||||||||
| Mechanical Dimension(W*D*H) mm | 555 × 725 × 1220 | 800 × 745 × 1400 | 1070 × 745 × 1400 | 1420*908*1650 | 1630 × 1026 × 1902 | |||||||||||
| Weight(Kg) | 200 | 235 | 260 | 315 | 335 | 470 | 480 | 560 | 730 | 870 | 1160 | 1210 | 1850 | 2450 | 2850 | |
| Optional | Dust proof net, Conformal coating, Input isolation transformer, ECO mode(Below 100K) | Dust proof net, Conformal coating, Input isolation transformer | ||||||||||||||



















Audited Supplier










