Audited Supplier
DCDPX02
Automatic Doors, Industrial Machinery, Led Products
Learning Code, Rolling Code
Black
433.92MHz
ABS
50-100m
Wireless
Universal
12V
LED Indicator Light
Single Item
0.060 Kg
Remote Control
No
Learning Code
9X11X4.Cm
ALZK
Box
box
Guangdong, China
Product Description
DC6V-30V 2CH wireless remote control switch
This is a universal 433.92MHz receiver. It is can work for 99.9% remote control brands on the market.
Products advantage
1Can learn Fixed and Rolling code 433,92Mhz remote controls separately and simultaneously !!!
22 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously
3The maximum number of remote controllers stored is 400, which is enough for the entire community to use.
4It's very easy to connect it to your control board. All you need is to connect 4 wires between receiver and control panel. If
you will need any technical support - i'm always at your service!
How to program
Momentary working model:
1.Learning transmitter's codes:
Press "learn 1" or "learn 2" for 1 second, the "learn_led" light, then, press the button which you choose on the transmitter till
the "learn_led" flash and go out, the transmitter's code has been stored.
• Repeat the above steps for other transmitters.
2.Erasing transmitter's codes:
Press "learn 1" or "learn2" and hold on to make the "learn_led light till go out, all codes of transmitters which had been stored
are erased.
ANT - Receiver Antenna
CH1 - Relay Output 1
CH2 - Relay Output 2
V+ - Voltage +
GND - Ground
1Can learn Fixed and Rolling code 433,92Mhz remote controls separately and simultaneously !!!
22 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously
3The maximum number of remote controllers stored is 400, which is enough for the entire community to use.
4It's very easy to connect it to your control board. All you need is to connect 4 wires between receiver and control panel. If
you will need any technical support - i'm always at your service!
How to program
Momentary working model:
1.Learning transmitter's codes:
Press "learn 1" or "learn 2" for 1 second, the "learn_led" light, then, press the button which you choose on the transmitter till
the "learn_led" flash and go out, the transmitter's code has been stored.
• Repeat the above steps for other transmitters.
2.Erasing transmitter's codes:
Press "learn 1" or "learn2" and hold on to make the "learn_led light till go out, all codes of transmitters which had been stored
are erased.
ANT - Receiver Antenna
CH1 - Relay Output 1
CH2 - Relay Output 2
V+ - Voltage +
GND - Ground
00:00 00:00
Working voltage | DC 9V-24V |
Max Current | 10A |
Working frequency | 433.92MHz=433MHz |
Quiescent Current | <5MA |
Receiving Sensitivity | >108dbm |
Amount of storage remote controls | 400pcs |
Built in Aerial antenna | Reception range 50m-100m |
RF Operating mode | ASK superheterodyne wireless reception |
