Audited Supplier
108 Cm3
17kN
19
32 mm
100g
Hydraulic
100-160 Rpm
Not Available
200mm
Kesu
PP.PC.ABS.Pet.PVC.Erpp/PVC.PPR
Vertical
Ks-450
5.5kw
470470mm
Product Description
Model | UNIT | KS-450 | ||||
Injection system | Screw Diameter | mm | 32 | |||
Injection Pressure | Kg/cm^2 | 1560 | ||||
Theoretical Shot volume | cm^3 | 112 | ||||
Max. Shot Weight (PS) | g/Oz | 100 | ||||
Injection Rate | cm3/s | 35 | ||||
Temperature control | Zone | 4 | ||||
Material Hopper Capacity | L | 20 | ||||
Clamping system | Clamping Force | T | 45 | |||
Opening Force | T | 7 | ||||
Distance Between Tie Bare | mm | 460x250 | ||||
Min Mold Height | mm | 200 | ||||
Opening Stroke | mm | 200 | ||||
Max. Open Daylight | mm | 400 | ||||
Ejector Force | T | 1.7 | ||||
Ejector stoke | mm | 45 | ||||
Round set diameter | mm | |||||
Others | Max. Hydaulic Pressure | Kg/cm2 | 140 | |||
Pump Output | L | 170 | ||||
Pump Motor Power | Kw | 5.5 | ||||
Barrel Heating Power | Kw | 4.5 | ||||
Total Wattage | Kw | 10 | ||||
MACHINE SIZE (L×W× Hmin) | M | 1.7x0.9x2.6 | ||||
MACHINE WEIGHT (APPROX.) | T | 2.1 | ||||
Title goes here.
Q1: Where is your factory?
A1: Jiaxing Kesu Machinery Co., Ltd., located in xingfeng Industrial Zone, Nanhu District, Jiaxing
City, Zhejiang Province, China.
City, Zhejiang Province, China.
Q2: Are you an integrated supplier of injection molding machines, molds, robots and auxiliary equipment?
A2: Yes, we can provide customers with complete solutions according to their requirements.
Q3: How is the quality control in your factory?
A3: All production steps must comply with this design requirement. Each machine needs to run automatically for at least 72 hours, and must be carefully checked before shipment.
Q4: Will you provide pre-sales service?
A4: Yes, we have an experienced pre-sales team, which can not only provide support for customers, including machines, molds and auxiliary selection, but also provide support for customers. Motor, factory machine layout, etc.
Q5: How about after-sales service? Will you send your engineer to my country to help debug and install the machine?
A5: Of course, we have many experienced overseas service technical engineers who will help you install the machine and support the training of workers. At present, we provide online access to COVID-19 through video phone.
Q6: When is the delivery time of the machine?
A6: Actually, the delivery time of the machine depends on the choice of the machine. Usually, the delivery time of standard machines may be within 1-2 months.
Q7: What is the warranty of the machine?
A7: The warranty period of the whole machine is 12 months, and the key parts will depend on.
Q8: Will the mold trial be launched in Jiaxing factory?
A8: Yes, customers can send the molds to KESU factory and have them tested.
Q9 Do you provide machine spare parts?
A9: Yes, KESU will provide customers with a set of standard spare parts, including heaters, filters, screw heads, screw washers, inspection rings and seals.
