Audited Supplier
4HG
Telephone 24-Hour Service
One Year
Tool Milling Machine
Hardware
Rocker
Angle Milling Cutter
Indexable Type
Artificial
Semiautomatic
High Precision
CE, ISO 9001
New
POLEDA
Wood Case
2000*1800*2500mm
China
8459590000
Product Description
Mechanical characteristic
The casting is made of Meehanna cast iron, with good rigidity, no deformation and good stability.
Spindle is equipped with precision bearing combination, strong cutting force and excellent accuracy.
The end milling head adopts a unique inverted hanging design, with good accuracy, easy operation and easy braking. (Customers can select special function products)
The nuts on the three-axis screw are made of advanced phosphorus meter copper, good wear resistance and long service life.
XY shaft slide after high frequency ripening treatment, good tail wear resistance, increase service life.
Equipped with lubrication system to ensure smooth slide.
| Product Name | ||
| Product Name | Milling machine | |
| Product model | 4H | |
| Product technical parameters | ||
| dimension | Table size | 1270*254MM |
journey | Left and right stroke(X) | 760MM |
| Anteroposterior stroke(Y) | 380MM | |
| Up and down stroke(Z) | 380MM | |
| Arm reach | 520MM | |
| Distance from spindle end face to table surface | 50-410MM | |
Principal axis coefficient | Spindle taper | R8/NT30 |
| Spindle speed | 80-5440RPM(16-speed) | |
| Spindle travel | 127MM | |
| Spindle horse power | 3HP | |
| Milling head | Milling head tilt Angle | 45° fore-and-aft |
Machine profile dimensions | T-slot (Number * Size * Spacing) | 3-15.88*75MM |
| Machine size (L * W * H)(MM) | 1750*1700*2200MM | |
| Approximate machine weight | 1280kgs | |
| The configuration is as follows | Accessories name and specification | quantity |
Standard parts for machine tools | 1,Hand oil pump | 1 |
| 2,Work light | 1 | |
| 3,Organ board + protective glue | 1 | |
| 4,Lever | 1 | |
| 5,Tools and toolboxes | 1 | |
| 6,Operating instruction | 1 | |
| Special parts for machine tools | 7,Two axis electronic ruler | 1 |
| 8, X-axis automatic feed | 1 | |
| 9, 6 "flat pliers | 1 | |
10.Clamp plate | 1 | |
| 11, R8/NT30 chuck | 1 | |
https://membercenter.made-in-china.com/productmanage.do?xcase=view&prodId=lQGUFEdwXrRO&queryGroupId=&queryCatCode=&pageSize=30&queryState=3&prodUpgradeActivity=&editVideo=1
