Audited Supplier
PTP 5acL20
WiFi Bridge
AP+STA
External
900Mbps
48V
29 dBi
White
ISO9001, RoHS, CE
802.11AC
900Mbps
IEEE 802.3at 48V Poe
20km Distance
High Gain Panel Antenna
with LED Display, Very Easy to Set
OEM & ODM
Carton
11ac 900Mbps data rate
China
8517629900
Product Description
5.8G 900Mbps 20KM PTP Wireless CPE for Long Distance Signal Transmisson
PTP 5acL20 is an 11ac 900Mbps long range outdoor PTP; 500+ Mbps throughput in 10KM distance- a result of powerful hardware platform with 802.11ac technology based radio and a proprietary data transmission protocol (TDMA). Incorporating a QCA 9563 CPU (750 MHz), a QCA 9886 radio and 128 MBytes of RAM and 16 MBytes of flash memory,with 29dBi high gain dish antenna, the PTP 5acL20 becomes the preferred product for long-distance point-to-point.
Product Higlight:
- Used special TVS lightning protection device improves the ability of the product in bad environment
- With 29dBi high gain dish antenna, , up to 20 km
- Supports 48V standard Poe and 12V DC power supply
- Support TDMA
- Support ATPC
- 500+Mbps
- Support one click pairing
- 80,000PPS
- Support IPv6
| Hardware | |
| Chips | QCA9563+QCA9886+QCA8334 |
| Flash | SPI NOR 16MB |
| DDR | DDR2-128MB |
| WAN | 1x10/100/1000 Base-T, RJ45,48V PoE power supply |
| LAN | 1x10/100/1000 Base-T, RJ45 |
| Led | Power,Wan,Lan,Wireless,RSSI×4 |
| ESD | ±6KV |
| Surge test | Line to line ±2KV |
| Power supply | 12V 1.5A DC or 48V 0.5A PoE (48V PoE adapter is included in the package) |
| Power consumption (max) | <15W |
| Slide Switch | One key setting master or slave |
| Reset key | Press the key for 2 ~ 5 seconds to pair automatically, press and hold for 10 seconds to restore the factory default configuration |
| Dimensions | 186 mm (Length)x86mm (width )x33mm (height ) |
| Weight | TBD |
| Mounting | Combination wall / pole mount included |
| protective class | IP65 |
| Operating temperature | Normal - 30 ° C to + 55 ° C, limit - 40 ° C to + 70 ° C |
| Humidity | 5 ~ 95 % (non-condensing) |
| Software | |
| Wireless operating modes | Access point (auto WDS), access point (TDMA3 ), station (WDS, TDMA3 ), station (ARP NAT) |
| Wireless techniques | Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control (ATPC) |
| Wireless security | WPA/WPA2 personal, WPA/WPA2 enterprise, WACL, user isolation |
| Wireless QoS | 4 queues prioritization on TDMA |
| Network operating modes | Bridge, router iPv4, router IPv6 |
| Network techniques | Routing with and without NAT, VLAN |
| WAN protocols | Static IP, DHCP client, PPPoE client |
| Services | DHCP server, SNMP server, NTP client, router advertisement daemon, ping watchdog |
| Management | HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet |
| Tools | Site survey, link test, antenna alignment |
| Wireless | |
| WLAN standard | IEEE 802.11 a/n/ac wave2, TDMA |
| Radio mode | TDMA MIMO 2x2 |
| Radio frequency band | 5150~5850MHz |
| Transmit power | Up to 26 dBm (country dependent) |
| Receive sensitivity | Varying between -90 and -58 dBm depending on modulation |
| Channel size | 20, 40,80 MHz |
| Modulation schemes | 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) 802.11 ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK) |
| Data rates | 802.11 ac @ 40 MHz: 400, 360, 300, 270, 240, 180, 120, 90, 60, 30 Mbps 802.11 ac @ 80 MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps |
| Error correction | FEC,LDPC |
| Duplexing scheme | Time division duplex |
| 5.8G EVM | 802.11a: ≤-25dB ;802.11n: ≤-28 dB ;802.11ac: ≤-32 dB |
