Audited Supplier
| Rated Voltage | 0~480VAC |
|---|---|
| Loading Capacity | AWG#14: 15Amp max. / AWG#16: 10Amp max. |
| Ambient Temperature | -40ºC ~ +80ºC |
| Rated Frequency | 50/60Hz |
| Voltage | 500V |
Product pictures:
JL-240 series photocontrol receptacles were designed for the lanterns those intended to have an
ANSI C136.10-2006 receptacle to fit a twist-lock photocontrol. This series conform newly published ANSI
C136.41-2013 to allow a LED lamp multi-controlled through the receptacle.
This series offers 2 or 4 gold-plated low voltage pads on the top surface to fit photocontrol has ANSI
C136.41 conforming spring contacts, and offers male quick connectors at rear back for signal connection.
This series also offers 360 degree rotation limiting feature to conform ANSI C136.10 requirements.
Both JL-240X and JL-240Y have been recognized, and JL-200Z14 has been listed by UL to applicable US
and Canadian safety standards, under their file E188110, Vol.1 & Vol.2.
Item No. | JL-240X/JL-240Y/JL-240Z14 |
Applicable Volt Range | 0~480VAC |
Rated Frequency | 50/60Hz |
Power Loading | AWG#14: 15Amp max. / AWG#16: 10Amp max. |
Optional Signal Loading | AWG#18: 30VDC, 0.25Amp max. |
Ambient Temperature | -40ºC ~ +70ºC |
Overall Dimensions (mm) | 65Dia.x 40 65Dia.x 67 |
Accessory: Rear Cover | °R option ° °R option |
Spring Holder | - ° - |
Wall mount Back Cover | - - ° |
Lock Nut | - - ° |
Wall Mount Bracket | - - °30x(70+130) |
Leads | 6" Min. (See Ordering Information) |
Disconnect power; wire the receptacle according
to the diagram in right hand. An arrow indicating NORTH on the top of the receptacle is used to
assist correct direction. Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Adjust the receptacle position if necessary.
JL-240Y series supports tool-free rotation.
JL-240Z series supports Wall-mount and rotation.
