Audited Supplier
Fuel Truck, also called Fuel Tank, Fuel Tanker, Fuel Tanker Truck, Fuel Transfer Tank, Fuel Tranfer Tanker, Fuel Tranfer Truck, Oil Tank, Oil Tanker, Oil Tanker Truck, Oil Transfer Tank, Oil Tranfer Tanker, Oil Tranfer Truck.
To add a refuel system, then you can Refuel Vehicles at any time.
After adding a fuel dispenser, your truck can be a fuel dispenser truck. The fuel dispenser truck also can called refuel truck, fuel refiling truck. The fuel dispenser tanker truck is equipped with the truck chassis, fuel tank, fuel pump, PTO, fuel dispenser , fillilng hose etc.
You can choose the material of the fuel dispenser truck. We have carbon steel , stainiless steel and aluminium alloy steel material for your option.
Each fuel refueling truck is equiipped with European standard manhole cover, European or French standard discharge valve, emergency cut-off valve. The French standard discharge valve is mainly used in Malawi,Tanzania, Uganda, Mozambique, Zambia, Congo, Angola,Mali, Togo, Benin, Ivory Coast etc.
We do the water test for each fuel truck before sending out.
We also use this chassis to produce light cargo van truck ,samll box truck, light refrigerated trucks, 5T water truck, 5 tons mini dump trucks, fire trucks, garbage trucks, etc.
CNHTC-SINOTRUK-HOWO Small Tanker Truck 4x2 Oil Tank Truck 3 cubic ~ 5 cubic
Engine power 85kw / 116hp @ 290N.m
| 4x2 Chassis | BODY | |
| Overall dimensions (L×W×H) | 5995*2150*2550mm | Tank Capacity |
| Wheel base | 3360mm | 5000L / 5 Cbm |
| G.V.W | 7500kg | Optional: 3000L / 6000L / 8000L / 10000L Tanker |
| Curb weight(chassis) | 3050kg | |
| Engine Model | YN4102QB | Material & Thickness |
| Maximum power | 85 Kw at 3000 rpm | Carbon Steel Q235 / 4/5mm |
| Maximum torque | 290N.m at 1800-2100rpm | Optional:Stainless steel; Aluminum Alloy |
| Displacement | 3.76L | |
| Gear box | 5 Forward and 1 Reverse | Standard Equipment |
| Brake System | Air brake | 1. Equipped with 1 oil pump with 1 inlet valve and 1 outlet valve. 2. Tank divided into 3 compartments, each discharge valve for each compartment. 3. Each European standard manhole cover and each air emergency valve for each compartment. 4. Equipped with the folding barrier on top of the tank. 5. Equipped with a fire extinguisher, front ladder, grounding wire, plastic fender. |
| Steering Wheel | left/right hand drive | |
| LHD | ||
| Axle | Front 2.4T / 4.2T | |
| Suspension | 9+7- Leaf spring with shock absorber | Other Optional: |
| 11-leaf spring | 1.Filling system is controlleddigitally withcomputer tax controlling fuel dispenser. 2. flow meter 3.Various design can be selected, including shape,color and accessories. | |
| Tires & Quantity | 7.50R16 / 6+1 pcs | |
| Fuel Tank Capacity (L) | 120 | |
Other More models can be customized
eg: Howo 4x2 Cargo Truck, Howo 4x2 Box truck ,Howo 4x2 Dumper truck ,etc
Polished, waxed and rustproof before shipment,
using bulk carrier, ro-ro shipment or 40FR frame transportation,etc
A. Guarantee period
1.Date of start:
a. Sea transportation,starting from the very date of the B/L one month later;
b. Land transportation,starting from the very date of customs declaration.
B.Type:
a.Road truck: Within 6 months or terminates 20,000 km, whichever is reached first;
b.Off road truck & engineering truck: Within 6 months or terminates 30,000 km, whichever is reached first;
Scope of Guarantee: within the period of Guarantee, D-truck will guarantee to repair vehicle products manufactured and used by D-truck and vehicle products for which D-truck trademarks are permitted to use by D-truck free of charge, or replace any other parts or repair any other faults that not specifically indicated in Non-Guarantee Terms provided that said parts and faults are damage or occurred due to material defects or defective workmanship. The scope of the non-guarantee terms please see annex 1.
C,Compulsory service
Vehicles manufactured and used by D-truck and vehicles for which D-truck trademarks are permitted to use by D-truck running for 2000~4000km and within six months will enjoy one compulsory service.
NOTE: Normal wear and tear and maintenance are not covered by guarantee
EXPENDABLE ITEMS
Wear and usage takes place over variable time periods, depending on mileage covered, geographical and driving conditions driving behavior etc. These conditions influence to a very great degree the service life of the item in question.
Examples of expendable items:
Oil filters, Bulbs, Brake linings,
Fuel filters, Wiper blades, Coolants,
Air filters, Clutch plates, Oils,
Drive belts for fan, Fuses, Coolant filters,
Exhaust systems (Sistema de escape), Alternator etc.
NOTE: Expendable items are not covered by guarantee.
Annex 1
Scope of the non-guarantee terms
1 No guarantee will be provided to vehicles modified, reworked or changed without permission from D-truck .
1a No guarantee will be provided to vehicles,if it was not made the compulsory service within the vehicles running for 2000~4000km.
2 No guaranteed service will be provided to faults or damages as a result of the following reasons:
2.1 Customers did not use or upkeep the vehicles as per requirements specified in User's Manual and other documents provided by D-truck .
2.2 Improper use or overload of vehicles.
2.3 Appropriate measures had not been taken when the vehicle had failed, failure was impending, or alarm system of the vehicle had issued failure warning, and faults had been aggravated as the result;
2.4 Lead seals had been broken.
2.5 Use of parts or assemblies unauthorized by D-truck .
2.6 Use of lubricating oil, grease or coolant unspecified by D-truck .
2.7 Vehicles were serviced by units unauthorized by D-truck .
3 The following services or adjustments required by normal wear (consumption) and normal maintenance are not within the scope of guarantee:
3.1 The normal wear (consumption) and normal maintenance are the kinds of wear, damage and maintenance that might occur at any time and influenced by driving mileage, weather, environment, condition of use and driving operation.
3.2 Parts subject to normal wear (consumption) include: oil filter, fuel filter element, air filter element, friction disk of brake shoe, clutch driven disk, fan belt, windscreen wiper, bulb, fuse, lubricating oil, grease, coolant, battery electrolyte, fuel, tire, etc.
3.3 Normal maintenance includes: adjustment and repair of various types of valves, fuel injectors, hydraulic pumps, coolant pipes, fuel pipes, oil pipes and air pipes, and adjustment of power steering and clutch control systems.
4 For services within the scope of guarantee, D-truck only bears the guarantee parts but not any other losses and any other chargers which the government stipulated.
1. who are we? We are based in Hubei, China, start from 2021,sell to Africa(70.00%),South Asia(20.00%),Southeast Asia(10.00%). There are total about 10-100 people in our company.
2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
3.what can you buy from us?
a.chassis brands: DONGFENG,SINOTRUK,SHACMAN,FAW,FOTON,Beiben,JAC,JMC,,DAYUN,etc.
b,type of truck:tractor,Dump truck,water truck,oil tank truck,garbage truck,fire truck,cargo truck, semi-trailer,full trailer,
4. why should you buy from us not from other suppliers?
Hubei Ditaijie Industrial and Trading Co, . Ltd. is a professional export and manufacturing service enterprise for commercial vehicles, semi-trailers, used cars and trailers. We provide high quality products and services at low price to foreign customers.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,DDP,etc;
Accepted Payment Currency:USD,CNY,TZS,AOA,etc;
Accepted Payment Type: T/T, L/C,etc;
