Audited Supplier
Plant Oil Extraction Turnkey Solution,Full End-to-end Processing Technology,From Biomass to 96%+ Purity Plant Oil
- Extraction - and other substances are extracted from dried hemp. What is produced at this process is a solution composed of crude oil extract and solvent-ethanol.
- Filtration - Remove the vegetable oil glycerides and cellulose that are insoluble in ethanol and achieve the goal of dewaxing.
- Evaporation - Remove and recover most of the ethanol to obtain an extract with only a small amount of ethanol remaining.
- Decarboxylation - Convert -A into , remove light components (such as some aromatic hydrocarbons and hydrocarbon light terpenes), residual ethanol and water will also be removed in this process.
- Distillation - An important section of the process, 96%+ purity oil can be obtained.
- Crystallization - 99% pure crystals can be achieved.
- Drying- Dry crystals at low temperature in a vacuum drying oven to remove residual solvents, protect from excessive heat when removing residual pentane.
We design and manufacture extraction prodcution line for users in need of a simple device for small amounts of extract, as well as more complex equipment for industrial use. Our offer includes preprocess(dryer /grinder) ,coating machine ,package machine and process systems where the substance used as solvent is either a volatile hydrocarbon (butane extraction), an alcohol (alcohol extraction), or CO2 (supercritical extraction). Given the investment cost, complexity of use, and extract quality, each system has some advantages and disadvantages. Our goal has always been finding new user friendly solutions, which is why extraction equipment development is one of our top priorities.
| MODEL | Extractor | Multifunctional tank | Single -effect evaporator | Total motor power | Cooling water consumption | Dimension L*W*H m | |||||||
| Tank Volume L | Heating area | Jacket pressure MPa | Shell pressure MPa | Volume L | Heat exchanger area | agitator Motor power KW | Heating area | Condenser Cooling area | Agitator Motor power KW | kw | T/h | ||
| GK-100 | 110 | 0.52 | 0.3 | ATM | 130 | 0.7 | 0.37 | 0.85 | 2.0 | 0.37 | 2.6 | 2 | 2.45*0.8*2.35 |
| GK-200 | 220 | 0.96 | 0.3 | ATM | 230 | 1.5 | 0.75 | 1.50 | 4.0 | 0.37 | 3.7 | 4 | 2.8*0.975*2.5 |
| GK-300 | 350 | 1.12 | 0.3 | ATM | 350 | 2.0 | 0.75 | 2.30 | 5.0 | 0.37 | 3.7 | 5 | 3.2*1.05*2.6 |
| GK-500 | 620 | 1.5 | 0.3 | ATM | 620 | 2.9 | 0.75 | 3.20 | 10 | 0.37 | 4.5 | 10 | 3.5*1.3*3.05 |
Make Your Research More Accurate & Efficient
We design and manufacture extraction prodcution line for users in need of a simple device for small amounts of extract, as well as more complex equipment for industrial use. Our offer includes preprocess(dryer /grinder) ,coating machine ,package machine and process systems where the substance used as solvent is either a volatile hydrocarbon (butane extraction), an alcohol (alcohol extraction), or CO2 (supercritical extraction). Given the investment cost, complexity of use, and extract quality, each system has some advantages and disadvantages.
