Audited Supplier
ACEY-BCT506-512H
Provided
1 Year
Charge and Discharge
Lithium-ion Battery
5V/3A; 5V/6A; etc
Adjustable Within 10-100mm Range
ACEY
Plywood Box Packaging
China
Product Description
512 Channels 5V 3A 6A 18650 Li ion Battery Cell Capacity Grading Machine Charge Discharge Tester For Cylinder Battery
Battery Cell Test Equipment is used to test the formation, capacity and performance parameters of lithium batteries. It is a master-slave battery integrated test system composed of computers and equipment single-chip microcomputers. It has advanced structure, reliable performance, convenient operation, high efficiency, and extremely High cost performance is an indispensable production and testing equipment for lithium battery manufacturers, sub-capacity manufacturers and scientific research units.
| Battery Cell Capacity Grading Machine | |
| Device Model(Manaul) | ACEY-BCT506-512V (Vertical) |
| Device Model(Quick-clamping) | ACEY-BCT506-512H (Horizontal) |
| Structure Of Equipment (Device) | |
| Number of device channels | 512 Channels |
| Size (width * depth * height) cm | 160*55*184 |
| Clamp form | Cylindrical four-wire fixture |
| Color of device | Dark grey |
| Clamp center distance | 40mm/35mm |
| Support battery height | Adjustable within 10-100mm range |
| Working power | Three-phase five-wire system ac380v±10%, 50hz |
| Working power dissipation | ≤27kw |
| Work environment | Temperature 0-40 ºC, relative humidity ≤80% |
| Heat-dissipating method | Natural wind intake and upward exhaust |
| Channel Parameter | |
| Voltage testing range | 0-5V, 1MV resolution |
| Battery voltage range | Charge 0-4.5V: Discharge 4.5-2V |
| Constant voltage range | 2.5V-4.5V |
| Voltage accuracy | ±(1‰ reading +1‰ full) |
| Current range | 60mA-6A, Reslution: 1mA |
| Current accuracy | ±(1‰ reading +1‰ full) |
| Control mode | Computer connection equipment work, Whole |
| Machine Control | |
| Software Function | |
| Communication mode | Rs485, baud rate 57,600 |
| Process set | Maximum 32 work steps and 256 cycles |
| Charging mode | Constant current, constant voltage |
| Charging cutoff condition | Voltage, current, time, capacity |
| Discharge | Constant current |
| Discharge cut-off condition | Voltage, time, capacity |
| Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity, etc | |
| Protection function | |
| Time range | 0 - 30,000 minutes |
| Time accuracy | ≤±1‰ |
| Sampling inspection period | ≤8s |
| Minimum data recording frequency | ≤8s |
| Battery grading | By capacity, time, discharge platform, etc |
| Data processing | Data, graphs, and loop diagrams |
Q1:How to order?A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
