Audited Supplier
560*3.0*60
ISO9001:2008
Inverted Trapezoidal Tooth
560mm
Cutting
Hole Saw Blade
Uncoated
HSS Saw Blade
Carbon Steel Pipes,Stainless Steel,Titanium Alloy,
High Speed Circular Saw Machines
Cermet Circular Saw Blade
Customized
Hante
Cartons/Pallets
285/300/315/330/360/380/400/425/460/485/520/560
Made in China
8202201000
Product Description
Our ceramic carbide cold saw blades the are designed for work-piece materials: steek,iron,aluminum,copper,especially for stainless steel,hardened steel,titanium alloy,PCB(print circuit board).Too life of the solid carbide saw blades is 6-7 times
more than the ones of HSS(High speed steel),perfect surface of solid carbide saw blades for high precision,which is the optimized option to replace the HSS saw blades.
more than the ones of HSS(High speed steel),perfect surface of solid carbide saw blades for high precision,which is the optimized option to replace the HSS saw blades.
| saw blade Basic information | |||
| saw blade brand | Hante | blade material | alloy |
| blade brand | Sandvik | blade origin | Germany |
| base material | SK 8 Tool steel | basic brand | new Nippon iron ( Nippon steel) |
| base origin | Japan | Coating material | titanium silicon |
| suitable material | 304, 306, 316 stainless steel, titanium alloy and other hard materials | ||
| Sawing parameters | ||||||||
| Sawing material | Steel grade | Material characteristics | Material diameter | recommended saw blade specifications | Select type | saw blade speed(RPM) | Feed speed (mm/s) | feed amount (wire/tooth )feed * 60 + speed + number of teeth |
| stainless steel | 304 | The material is sticky and has high hardness | ∅30-70 | ∅285*60T/72T | 70/75 | 60-75 | 2.5-4 | 3-4.5 |
| stainless steel | 316 | The material is sticky and has high hardness | ∅30-90 | ∅300*60T/72T | 80/90 | 60-75 | 2.5-4 | 3-4.5 |
| ∅315*60T/72T | ||||||||
| Saw blade use precautions | ||||||||
| 1. The saw blade must be installed correctly when installing, check several times more, incorrect installation will affect the surface quality of saw-cutting products, but also affect the life of saw blade. | ||||||||
| 2,The cleaning of circular sawing machine is not in place, especially if there are iron chips in it can cause the saw blade to consume too quickly. | ||||||||
| 3,The saw blade should be handled gently to avoid bumping into the surface of the saw blade. The surface of the saw blade is not smooth and the friction force increases. | ||||||||
| 4,Cutting parameters are related to cutting materials. Different materials should choose different cutting parameters, and cutting efficiency can not be pursued to lead to the fatigue of the saw blade in advance. | ||||||||
| 5,Before cutting materials, pay attention to clean the oxide scale and iron chips on the surface of the material to avoid large friction and excessive loss of the saw blade. | ||||||||
| 6,The equipment works for a long time, the saw blade load is increased, can not be buffered, loss too fast is inevitable. |
