Audited Supplier
TH130
12 Months
12 Months
2
Gasoline
2 Stroke
Outboard
Short Shaft / Long Shaft
Cdi
4500-5500 R/M
7.3 Kw
1050±50 R/M
56*50mm
B7HS-10
Manual
Tiller Handle
Forward-Neutral-Reverse
TH
Carton
China
840721000
Product Description
| Model (2-stroke) | HMT9.9D |
| Demension | Overall Length:878mm Overall Width:330mm Overall Height S:1,062mm Overall Height L:1,189mm |
| Net Weight | Short Shaft:38.5 kg Long Shaft:40.5 kg |
| Gross Weight | Short shaft:50kg Long Shaft:52kg |
| Full Throttle Operating Range | 4500-5500 r/m |
| Maximum Output | 11 KW |
| Idling Speed | 1050±50 r/m |
| Displacement | 246 cc |
| Bore&Stroke | 56*50mm |
| Ignition Systerm | CDI |
| Spark Plug | B7HS-10 |
| Spark Plug Gap | 0.9-1.0 mm |
| Control Systerm | Tiller Handle |
| Starting Systerm | Manual |
| Starting Carburetor Systerm | Choke Valve |
| Gear Position | Forward-Neutral-Reverse |
| Gear Transmission Ratio | 2.08 |
| Trim and Tilt Systerm | Manual Tilt |
| Recommended Fuel | Unlead Gasoline |
| Recommended Engine Oil | 2-Stroke Outboard Motor Engine Oil |
| Gear Oil | 0.250L |
| Fuel Tanks Capacity | 24L |
| Fuel Oil Ratio | 50:1 |
| Package Size | 143.5*72*45 cm |
2 Stroke Outboard Motor Boat Engine |
2.5HP 3HP 5HP 6HP 9.8HP 9.9HP 15HP 18HP 20HP 25HP 30HP 40HP 60HP 75HP |
4 Stroke Outboard Motor Boat Engine |
2.5HP 6HP 15HP |
Air Cooled Outboard Motor Boat Engine |
Jet Pump Outboard Motor Boat Engine |
703 Remote Control Box | Crankshaft | Housing Bearing | Propeller Hardware kit |
Anode | Drive Shaft | Insert Cartridge | Pulser Coil Assy |
Bearing | Drum Sheave | Lanyard Stopper Switch | Reed Valve Assy |
Bolt | Filter Assy | Lighting Coil | Regulator Rectifier |
Bracket Clamp | Flywheel | Lower Unit Assy | Ring Cross Pin |
Bracket Steering | Fuel Connector | Mount Damper | Rod Tilt Lock |
Carburetor Assy | Fuel Line Assy | Nut | Seal Labyrinth |
Case Starter | Fuel Pump | Oil Seal | Silencer Assy Intake |
Casing Upper | Fuel Tank Assy | O-Ring | Spark Plug |
CDI Unit Assy | Gasket | Outer Plate Cartridge | Spring |
Charge Coil | Gears | Pawl Drive | Starter Assy |
Clutch Dog | Grip Steering Handle | PIN DOWEL | Starter Motor |
Coil Ignition | Guide Exhaust | Piston | Top Cowling Assy |
Connecting Rod | Handle Starter | Propeller | Water Pump Impeller |
Crankcase Assy | Handle Steering Assy | Propeller Shaft | Water Pump Repair Kit |
1.Our Shipyard:Ningbo Zhenhe shipyard, and now Taihang is the branch representative of our yard.
2.Our founding team has experience of more than 15 years in ship building and ship repair with our own engineer and designer.
3.Equipment quality guarantee: Based on shipyard feedback, we built up manufacturer file to ensure the good quality of the products. Also we can send our engineers to help our clients to install and test these exported equipment.
4.We are a second hand ship broker to help you find the satisfied used different kind vessels.
5.We are able to provide the CKD kits and one-stop service based on our laser-cutting machine and purchase ability
6.We have a very professional design and technical team to work out perfect plan for our clients and help to slove out any matters with pre-sale and after-sale.
7.Customer Distribution: Tananzia, Rwanda, India(Mumbai and Kalkatta), Suva, Portugal, Russia, Nertherland, Iceland, Denmark, Malaysia, Mexico......
