
The 5HP Compressor Industrial Water Chiller Machine Air Cooled, also known as an air-cooled box-type industrial chiller unit, utilizes a air-cooled heat dissipation design. It draws surrounding air into the equipment using built-in fans and dissipates heat through a condenser, thereby reducing the system temperature. It does not require an additional water cooling system and is relatively easy to install and maintain.
| NO | Name | Specification type | Performance parameter |
| 1 | unit | Mould | YSD-5HP |
| 2 | Cooling capacity | KW | 13.95 |
| Kcal/h | 11990 | ||
| 3 | power supply | V | 5N-380-50HZ |
| 4 | way to control | type | Capillary |
| 5 | Total power | A | 4.86 |
| 6 | compressor | Type | Fully enclosed vortex type |
| Cooling input power(kW) | 3.75 | ||
| Type | vortex type | ||
| 7 | Fan | Type | External rotor axial flow fan |
| power(KW) | 0.36 | ||
| Air volume m3/h | 5000 | ||
| 8 | Water pump | Type | Centrifugal clean water pump |
| power(KW) | 0.37 | ||
| Lift M | 18 | ||
| flowL/MIN | 90 | ||
| 9 | Condenser | Type | Aluminum fin sleeve copper tube type |
| Cooling air volume(M3/h) | 5000 | ||
| 10 | Evaporator | Type | coiled tube type |
| Water volume m3/h | 2.4 | ||
| Water solubility m3 | 0.065 |
| 11 | Water tank | Material | SUS304 |
| Volume L | 45 | ||
| 12 | Piping | Chilled water media outlet | DN20(According to customer requirements) |
| Chilled water media entrance | DN20(According to customer requirements) | ||
| Drain | DN15(According to customer requirements) | ||
| Tap water inlet | DN15(According to customer requirements) | ||
| 13 | Microcomputer controller | Display status | Key display |
| Contribute | 305000A | ||
| Power output selection | Relay output | ||
| Temperature control rangeºC | +5~+35 | ||
| Temperature control accuracyºC | ±2.0 | ||
| 14 | Alarm device | Abnormal temperature | Circulating water temperature is too low alarm and cut off the compressor |
| Power supply reverse phase | Power phase detection prevents the pump and compressor from reversing | ||
| High and low voltage fault | The pressure switch detects the pressure status of the refrigerant system | ||
| Compressor overload | Thermal relay protects the compressor | ||
| Compressor overheating | Internal protector protects the compressor | ||
| Pump overload | Thermal relay protects the pump | ||
| Low water alarm | Water level switch | ||
| Short circuit | air switch | ||
| Cold media | Tap water | ||
| 15 | Dimensions | L*W*H(MM) | 1250*640*1250 |
| 16 | Total Weight | KG | 170 |







FAQ
1. Can you guarantee your quality if we order on you ?
Of course.Best quality is our principle all the time.You can be assured on our production.
2.What should I do if we are not able to operatethe the machine when we receive it?
Operation manual guides you the installation.Besides, we haveprofessional after-sale groupto customer 's site to solve any problems.weprovide 7*24 hours on-line technical support.
3.How could I get the spares on machines?
We will send extra sets of easy broken spares andaccessories likeo ring etc.Non-artificial damagedspares will be sent freelyduring 1 year 's warranty.
4.How to maintain such a machine ?
Please clean every part after filling thus can givelong using life of machine and make a carefullyclean 3 times a year.








Audited Supplier










