Audited Supplier
Nema standard motors are mainly used in USA ,Canada and Mexico .The working frequency of the motor is 60hz .the working voltage of the three -phase motor is 230/460v ,460v ,575v .and the single -phase motor is 115/208-230v .the terminal box is generally fixed in the middle of the base .the motor has 3,6,9 and 12 lead wires ,and the standard length of the lead wire is 6 inches(15.24cm) long from the base .The corresponding motor synchronous transmission speed is 2pole motor 3600RPM ,4Pole motor 1800RPM .6pole motor 1200RPM
Operating conditions
1) Ambient temperature :-15ºC<0<40ºC
2)Insulation :B/F
3)Altitude:Not exceeding 1000m
4)Protection class:IP22/23/24,IP54
5) Rated frequency :50hz /60hz
It is used for water pumps ,fans ,air compressors ,material handing equipment and other general use.Use in humid ,dusty or dirty enviroments
Feature :
1) class F insulation ,class B temperature rise assessment (140 frame and above )
2) Ambient temperature 40ºC,NEMA B design
3) Fully enclosed bearings at both ends
4) triangular connection
5)The motor nameplate is marked with 50hz and 60hz operation data
| Output power (Hp) | Speed (R/Min) | Model | Voltage (V) | Frequency (HZ) | Current (A) | Eff (%) | P.F | Tstart/tn | T.max/tn | Ist/In | Weight (lb) |
| 1/4 | 3250 | TPS48-2 | 230/460 | 60 | 1.11/0.55 | 68 | 0.6 | 2.45 | 2.6 | 4.6/2.3 | 17 |
| 1725 | TPS48-4 | 230/460 | 60 | 1.25/0.63 | 60.2 | 0.6 | 2.45 | 2.6 | 4.6/2.3 | 19 | |
| 1/3 | 3250 | TPS48-2 | 230/460 | 60 | 1.15/0.57 | 72 | 0.76 | 2.45 | 2.8 | 5/2.5 | 21 |
| 3450 | TPS56c-2 | 230/460 | 60 | 1.16/0.58 | 72 | 0.75 | 1.75 | 2.8 | 5/2.5 | 23 | |
| 1725 | TPS48-4 | 230/460 | 60 | 1.32/0.66 | 67 | 0.71 | 2.45 | 3 | 5/2.5 | 23 | |
| 1730 | TPS56C-4 | 230/460 | 60 | 1.38/0.69 | 67 | 0.68 | 2.45 | 3 | 5/2.5 | 22 | |
| 1/2 | 3250 | TPS48-2 | 230/460 | 60 | 1.53/0.76 | 74 | 0.8 | 2.65 | 2.8 | 20/10 | 23 |
| 3450 | TPS56C-2 | 230/460 | 60 | 1.61/0.83 | 74 | 0.76 | 1.75 | 2.8 | 20/10 | 26 | |
| 1725 | TPS48-4 | 230/460 | 60 | 1.7/0.85 | 70 | 0.78 | 2.8 | 3 | 20/10 | 26 | |
| 1730 | TPS56C-4 | 230/460 | 60 | 1.84/0.92 | 70 | 0.72 | 2.8 | 3 | 20/10 | 23 | |
| 3/4 | 3450 | TPS56C-2 | 230/460 | 60 | 2.34/1.17 | 76 | 0.79 | 1.75 | 2.7 | 25/12.5 | 30 |
| 1730 | TPS56C-4 | 230/460 | 60 | 2.57/1.28 | 74 | 0.74 | 2.55 | 3 | 20/12.5 | 25 | |
| 1 | 3480 | TPS143T-2 | 230/460 | 60 | 3.13/1.57 | 77 | 0.78 | 1.75 | 2.8 | 30/15 | 38 |
| 1730 | TPS56C-4 | 230/460 | 60 | 3.08/1.54 | 82.5 | 0.74 | 2.75 | 3 | 30/15 | 40 | |
| 1.5 | 3480 | TPS143T-2 | 230/460 | 60 | 4.03/2.02 | 82.5 | 0.83 | 1.75 | 2.5 | 40/20 | 50 |
| 1730 | TPS56C-4 | 230/460 | 60 | 4.33/2.16 | 84 | 0.76 | 2.5 | 2.8 | 40/20 | 48 | |
| 2 | 3480 | TPS145T-2 | 230/460 | 60 | 5.4/2/7 | 84 | 0.83 | 1.7 | 2.4 | 50/25 | 53 |
| 1730 | TPS56C-4 | 230/460 | 60 | 5.82/2.91 | 84 | 0.77 | 2.35 | 2.7 | 50/25 | 51 | |
| 1740 | TPS145T-4 | 230/460 | 60 | 5.67/2.84 | 84 | 0.79 | 2.35 | 2.7 | 50/25 | 52 | |
| 3 | 3500 | TPS182T-2 | 230/460 | 60 | 7.39/3.69 | 85.5 | 0.89 | 1.6 | 2.3 | 64/32 | 81 |
| 1745 | TPS182T-4 | 230/460 | 60 | 8.08/4.04 | 87.5 | 0.79 | 2.15 | 2.5 | 64/32 | 75 | |
| 5 | 3500 | TPS184T-2 | 230/460 | 60 | 11.9/5.97 | 87.5 | 0.91 | 1.5 | 2.15 | 92/46 | 97 |
| 1745 | TPS184T-4 | 230/460 | 60 | 13.4/6.72 | 87.5 | 0.79 | 1.85 | 2.25 | 92/46 | 90 | |
| 7.5 | 3510 | TPS213T-2 | 230/460 | 60 | 18.3/9.13 | 88.5 | 0.88 | 1.4 | 2 | 127/63.5 | 86 |
| 1765 | TPS213T-4 | 230/460 | 60 | 19.1/9.57 | 89.5 | 0.83 | 1.75 | 2.15 | 127/63.5 | 126 | |
| 10 | 3500 | TPS215T-2 | 230/460 | 60 | 24.2/21.1 | 89.5 | 0.88 | 1.35 | 2 | 162/81 | 121 |
| 1765 | TPS215T-4 | 230/460 | 60 | 25.3/12.7 | 89.5 | 0.83 | 1.65 | 2 | 162/81 | 135 |
We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting - both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting - both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,
Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.
