Audited Supplier
410
Steel Plate
ASTM, AISI, JIS, DIN, BS
Cold Rolled/Hot Rolled
Cutlery, Steam and Gas Turbine Blades, Bolts, Nuts
Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Pump and Valve Parts and Shafts, Nozzles
Stock
0.3mm to 280mm
1000mm to 2200mm
Cut as Requirement
2b, No.1, 1d, 2D, Hl, 8k, Ba, Sb
En 10204/3.1
Mill Edge or Slit Edge
ZYTC
as Customer's Requirement
China
72192410
Product Description
1: Product Details
410 (UNS S41000) is a 12% chromium martensitic stainless steel plate that can be heat treated to obtain a wide range of
mechanical properties. The alloy has good corrosion resistance along with high strength and hardness. In the annealed
condition, 410 is ductile and may be formed. It remains magnetic in both the annealed and heat treated conditions.
410 stainless steel plate is resistant to atmospheric conditions, water and some chemicals. It can be used in environments
containing weak or diluted acetic acid, naptha, nitric acid and sulfuric acid. The alloy is also resistant to acids contained in foods.
410 stainless steel plate can also be used in slightly chlorinated and desaereted water. It performs well in oil and gas
applications where desaereted and low hydrogen sulfide exist. However, the alloy is prone to chloride attack, particularly
in oxidizing conditions.
410 stainless steel plate operates well in environments requiring moderate corrosion resistance and high mechanical properties.
410 stainless steel plate resists oxidation up to 1292°F (700°C) continuously, and up to 1500°F (816°C) on an intermittent basis.
Heat Treatment:
Annealing - Heat slowly to 1500 - 1650°F (816 - 899°C), cool to 1100oF (593°C) in furnace, air cool
Process Annealing - Heat to 1350 - 1450°F (732 - 788°C), air cool
Hardening - Heat to 1700 - 1850°F (927 - 1010°C), air cool or oil quench. Follow by stress-relief or temper
Stress Relieving - Heat to 300 - 800°F (149 - 427°C) for 1 to 2 hours, air cool
Tempering - Heat to 1100 - 1400°F (593 - 760°C) for 1 to 4 hours, air cool
2: Chemical Composition
3: Stainless Steel Plate Process
4: Package & Shipping
5: Company Introduction
6: Contact Us
410 (UNS S41000) is a 12% chromium martensitic stainless steel plate that can be heat treated to obtain a wide range of
mechanical properties. The alloy has good corrosion resistance along with high strength and hardness. In the annealed
condition, 410 is ductile and may be formed. It remains magnetic in both the annealed and heat treated conditions.
410 stainless steel plate is resistant to atmospheric conditions, water and some chemicals. It can be used in environments
containing weak or diluted acetic acid, naptha, nitric acid and sulfuric acid. The alloy is also resistant to acids contained in foods.
410 stainless steel plate can also be used in slightly chlorinated and desaereted water. It performs well in oil and gas
applications where desaereted and low hydrogen sulfide exist. However, the alloy is prone to chloride attack, particularly
in oxidizing conditions.
410 stainless steel plate operates well in environments requiring moderate corrosion resistance and high mechanical properties.
410 stainless steel plate resists oxidation up to 1292°F (700°C) continuously, and up to 1500°F (816°C) on an intermittent basis.
Heat Treatment:
Annealing - Heat slowly to 1500 - 1650°F (816 - 899°C), cool to 1100oF (593°C) in furnace, air cool
Process Annealing - Heat to 1350 - 1450°F (732 - 788°C), air cool
Hardening - Heat to 1700 - 1850°F (927 - 1010°C), air cool or oil quench. Follow by stress-relief or temper
Stress Relieving - Heat to 300 - 800°F (149 - 427°C) for 1 to 2 hours, air cool
Tempering - Heat to 1100 - 1400°F (593 - 760°C) for 1 to 4 hours, air cool
2: Chemical Composition
| Tianjin Zhongyantiancheng Steel Co.,Ltd | ||||
| Commodity | Stainless Steel Plate/Stainless Steel Sheet | |||
| Material | 410 | |||
| Standard | GB | JIS | ASTM/ASME | DIN |
| 1Cr13 | SUS 410 | 410 | 1.4006 | |
| Chemical Composition | C | Mn | P | S |
| 0.08-0.15 | ≤1.00 | ≤0.040 | ≤0.03 | |
| Si | Cr | Ni | ||
| ≤1.00 | 11.5-13.5 | ≤0.75 | ||
| Thickness | 0.3mm--16mm(cold rolled) 3mm--280mm(hot rolled) | |||
| Width | 1000mm--2200mm | |||
| Length | 1000mm-6000mm, as customers' request | |||
| Surface | BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D | |||
| manufacture | Hot Rolled/Cold Rolled | |||
| Packing | Packed in bundles with standard export sea-worthy package | |||
| Delivery Time | Within 15 working days, according to customers' quantities | |||
| Quality | High Quality.SGS inspection is accepted if needed | |||
| Place of Origin | Tianjin | |||
| Productivity | 500 MT/Month | |||
| Payment | T/T,L/C | |||
| MOQ | 1 MT | |||
| Application | Petroleum Refining and Petrochemical Processing Equipment,Press plates | |||
| Note | We can also do other materials | |||
3: Stainless Steel Plate Process
4: Package & Shipping
5: Company Introduction
6: Contact Us
