Audited Supplier
RTF
High
Current Fuse
High Voltage
Insert
FF
JIS
Porcelain
6/11/15/24/33/36kv
Yes
1PCS/CTN
ESNEW
1PCS Per Carton
Zhejiang
8535100000
Product Description
*INSTRUCTION
Expulsion Fuse Cutout (Drop out fuse cutout) is used for outdoor medium voltage and high voltage alternative current system, which mainly protects transformer and distribution power line from short circuit and overload.
The fuse carrier drops out when the fuse link melted.
Standard type fuse cutout with solid link can function like overhead disconnect switch 200 amp.
Products are completely in accordance with IEC60282-2,ANSI C37.41,ANSI C37.42 standard.
*Our Strength
-More than 10 years of production experience;
-Sample order is available;
-Commercialization is available.
-Continuous improvement and perfection of products;
-High productivity, large spare parts inventory.
*Design Highlights
√Fuse carrier
-Made of epoxy glass fiber lined with UV resistant coating and arc-extinguishing material, the fuse tube does not absorb moisture or deform.
-The fuse carrier adopts single exhaust design (downward) with a solid cap which can prevent water intrusion and to avoid the threat of free gas to the circuit, unnecessary mechanical damage or short circuit.
√Contact
-The higher contact is made of pure conductive copper or highly elastic conductive copper alloy with silver plating;
-The lower contact is made of 60%~62% content brass with sliver plating.
√Terminals
-Both higher and lower terminals are made of 60%~ 62% content brasses with sliver or tin plating
√Porcelain & Polymer insulator body
-Porcelain insulator base: made of bird-proof ceramic, adopted advanced casting technology and using cement, which can prevent broken of porcelain body caused by thermal expansion and contraction.
-Silicone rubber insulator base: silicone rubber material has already passed 1,000 hours of salt spray test.
12-15KV Series Expulsion Fuse Cut Out
15-27KV Series Expulsion Fuse Cut Out
24-27KV Series Expulsion Fuse Cut Out
24-33KV Series Expulsion Fuse Cut Out
33-36KV Series Expulsion Fuse Cut Out
Produnction Line Display:
Shippment and Payment:
Brand Strategy:
Expulsion Fuse Cutout (Drop out fuse cutout) is used for outdoor medium voltage and high voltage alternative current system, which mainly protects transformer and distribution power line from short circuit and overload.
The fuse carrier drops out when the fuse link melted.
Standard type fuse cutout with solid link can function like overhead disconnect switch 200 amp.
Products are completely in accordance with IEC60282-2,ANSI C37.41,ANSI C37.42 standard.
*Our Strength
-More than 10 years of production experience;
-Sample order is available;
-Commercialization is available.
-Continuous improvement and perfection of products;
-High productivity, large spare parts inventory.
*Design Highlights
√Fuse carrier
-Made of epoxy glass fiber lined with UV resistant coating and arc-extinguishing material, the fuse tube does not absorb moisture or deform.
-The fuse carrier adopts single exhaust design (downward) with a solid cap which can prevent water intrusion and to avoid the threat of free gas to the circuit, unnecessary mechanical damage or short circuit.
√Contact
-The higher contact is made of pure conductive copper or highly elastic conductive copper alloy with silver plating;
-The lower contact is made of 60%~62% content brass with sliver plating.
√Terminals
-Both higher and lower terminals are made of 60%~ 62% content brasses with sliver or tin plating
√Porcelain & Polymer insulator body
-Porcelain insulator base: made of bird-proof ceramic, adopted advanced casting technology and using cement, which can prevent broken of porcelain body caused by thermal expansion and contraction.
-Silicone rubber insulator base: silicone rubber material has already passed 1,000 hours of salt spray test.
12-15KV Series Expulsion Fuse Cut Out
| Electrical characteristics | Specification | Unit |
| Voltage | 10~15 | KV |
| Current | 100/200/300 | A |
| Frequency | 50/60 | Hz |
| Power frequency withstand voltage to earth (1 min) | 42 | KV |
| Power frequency withstand voltage phase to phase (1 min) | 48 | KV |
| Impulse voltage to earth | 95 | KV |
| Impulse voltage phase to phase | 110 | KV |
| Breaking current | 8 | KA |
| Creepage distance: | 220 | mm |
| Spare parts | ||
| Mounting bracket | with/without | |
| Arc shortening rod | with/without | |
| Arc distinguish chamber | with/without | |
| Fuse link | without | |
| Material | ||
| Copper content for brass | Brass (60~60%) | |
| Conductive parts material | Copper with silver plated/Copper with tin plate | |
| Insulator | Porcelain/Polymer | |
| Fuse tube | Fiber glass | |
| Package | ||
| Qty/package | 1 | pc/carton |
| Service conditions | ||
| Environment maximum temperature | 40 | ºC |
| Pollution level | II | |
| Altitude | ≤1000 | Meter |
| Standard | IEC60282-2 | |
15-27KV Series Expulsion Fuse Cut Out
| Electrical characteristics | Specification | Unit |
| Voltage | 15~27 | KV |
| Current | 100/200/300 | A |
| Frequency | 50/60 | Hz |
| Power frequency withstand voltage to earth (1 min) | 45 | KV |
| Power frequency withstand voltage phase to phase (1 min) | 50 | KV |
| Impulse voltage to earth | 125 | KV |
| Impulse voltage phase to phase | 140 | KV |
| Breaking current | 8 | KA |
| Creepage distance: | 320 | mm |
| Spare parts | ||
| Mounting bracket | with/without | |
| Arc shortening rod | with/without | |
| Arc distinguish chamber | with/without | |
| Fuse link | without | |
| Material | ||
| Copper content for brass | Brass (60~60%) | |
| Conductive parts material | Copper with silver plated/Copper with tin plate | |
| Insulator | Porcelain/Polymer | |
| Fuse tube | Fiber glass | |
| Package | ||
| Qty/package | 1 | pc/carton |
| Service conditions | ||
| Environment maximum temperature | 40 | ºC |
| Pollution level | II | |
| Altitude | ≤1000 | Meter |
| Standard | IEC60282-2 | |
24-27KV Series Expulsion Fuse Cut Out
| Electrical characteristics | Specification | Unit |
| Voltage | 24~27 | KV |
| Current | 100/200/300 | A |
| Frequency | 50/60 | Hz |
| Power frequency withstand voltage to earth (1 min) | 50 | KV |
| Power frequency withstand voltage phase to phase (1 min) | 60 | KV |
| Impulse voltage to earth | 150 | KV |
| Impulse voltage phase to phase | 160 | KV |
| Breaking current | 8 | KA |
| Creepage distance: | 520 | mm |
| Spare parts | ||
| Mounting bracket | with/without | |
| Arc shortening rod | with/without | |
| Arc distinguish chamber | with/without | |
| Fuse link | without | |
| Material | ||
| Copper content for brass | Brass (60~60%) | |
| Conductive parts material | Copper with silver plated/Copper with tin plate | |
| Insulator | Porcelain/Polymer | |
| Fuse tube | Fiber glass | |
| Package | ||
| Qty/package | 1 | pc/carton |
| Service conditions | ||
| Environment maximum temperature | 40 | ºC |
| Pollution level | II | |
| Altitude | ≤1000 | Meter |
| Standard | IEC60282-2 | |
24-33KV Series Expulsion Fuse Cut Out
| Electrical characteristics | Specification | Unit |
| Voltage | 27~33 | KV |
| Current | 100/200/300 | A |
| Frequency | 50/60 | Hz |
| Power frequency withstand voltage to earth (1 min) | 70 | KV |
| Power frequency withstand voltage phase to phase (1 min) | 80 | KV |
| Impulse voltage to earth | 170 | KV |
| Impulse voltage phase to phase | 180 | KV |
| Breaking current | 6 | KA |
| Creepage distance: | 660 | mm |
| Spare parts | ||
| Mounting bracket | with/without | |
| Arc shortening rod | with/without | |
| Arc distinguish chamber | with/without | |
| Fuse link | without | |
| Material | ||
| Copper content for brass | Brass (60~60%) | |
| Conductive parts material | Copper with silver plated/Copper with tin plate | |
| Insulator | Porcelain/Polymer | |
| Fuse tube | Fiber glass | |
| Package | ||
| Qty/package | 1 | pc/carton |
| Service conditions | ||
| Environment maximum temperature | 40 | ºC |
| Pollution level | II | |
| Altitude | ≤1000 | Meter |
| Standard | IEC60282-2 | |
33-36KV Series Expulsion Fuse Cut Out
| Electrical characteristics | Specification | Unit |
| Voltage | 33~36 | KV |
| Current | 100/200/300 | A |
| Frequency | 50/60 | Hz |
| Power frequency withstand voltage to earth (1 min) | 70 | KV |
| Power frequency withstand voltage phase to phase (1 min) | 80 | KV |
| Impulse voltage to earth | 170 | KV |
| Impulse voltage phase to phase | 180 | KV |
| Breaking current | 6 | KA |
| Creepage distance: | 720 | mm |
| Spare parts | ||
| Mounting bracket | with/without | |
| Arc shortening rod | with/without | |
| Arc distinguish chamber | with/without | |
| Fuse link | without | |
| Material | ||
| Copper content for brass | Brass (60~60%) | |
| Conductive parts material | Copper with silver plated/Copper with tin plate | |
| Insulator | Porcelain/Polymer | |
| Fuse tube | Fiber glass | |
| Package | ||
| Qty/package | 1 | pc/carton |
| Service conditions | ||
| Environment maximum temperature | 40 | ºC |
| Pollution level | II | |
| Altitude | ≤1000 | Meter |
| Standard | IEC60282-2 | |
Produnction Line Display:
Shippment and Payment:
Brand Strategy:
