1.FANUC 0i -MD CNC system: stable performance, convenient operation programming, perfect and punctual after-sales service.
2.FANUC servo motor for six coordinate axis and main axis: good characteristic and perfect low speed performance.
3.With high-precision ball screw bar and rolling linear guide, the operating components make positioning accurately.
4.Remote control device is adopted in cooling system. Depends on the hole size, materials, chips and required precision, adjusting the flow rate and pressure can optimize the cooling result.
5.ZJR series CNC deep-hole drilling machine is mainly used for extremely difficult processes of deep-hole in mold industry. It's spoken highly of its high-efficiency, low-cost, humanized technological process.
Technical Specifications of
ZJR Series Six-Axis CNC Deep-hole Drilling Machine Tool


Items | ZJR10-1210 | |
Processing Capacity | Diameter of the hole for gun drill | φ3~φ30 mm |
Maximum depth of the hole for gun drill | 1000 mm | |
Processing Travel | (X) Processing travel(from left to right)of the working table | 1200 mm |
(Y) Processing travel of sliding table | 1000 mm | |
(Z) Processing travel of column | 500 mm | |
(A) The rotary angle of ram | 15 , 25 The spindle turns upward 15 degrees, and down to 25 degrees | |
(B) Rotation angle | 360 (, 15 ) 360 degrees(servo control, indexing accuracy 15 seconds) | |
Spindle | Taper hole of spindle | BT40 |
Maximum speed of spindle | 4500 rpm | |
Power | Spindle motor | 7.5 KW/11 KW |
X X axis servo motor | 30 N.m | |
Y Y axis servo motor | 30 N.m | |
Z Z axis servo motor | 30 N.m | |
W W axis servo motor | 12 N.m | |
A A axis servo motor | 30 N.m | |
B B axis servo motor | 30 N.m | |
Total power | 40 KW | |
CNC Index | Maximum loading capacity | 5 ton |

Due to the continuous improvement of products, specifications and pictures are for reference only. For details, please visit our website: http://zonjet.en.made-in-china.com
