Audited Supplier
CFD-FS-S-150F
24 Hours
18 Months
SUS304/SUS316
25-26mm
Pn5K,Pn10K,Pn16K
651328
ANSI/DIN/JIS/BS/EU/GB
CFDPLAS
Wooden Box
DN150mm, 6 inch
Changzhou, China
90268090
Product Description
In accordance with the IMO regulations,bunker samplers should be available on board the vessels,to ensure safe fuel sampling during bunkering.More specifically, MARPOL's Annex VI/Regulation 18 dictates that a sample of fuel oil should be obtained at the ship's fuel receiving pipe line.
The CFDPLAS BUNKER SAMPLER is approved by the Classification(BVQI) and has been manufactured in compliance with the above regulations.FengDi Plastic Technology has constructed sampling systems for this purpose with which samples from the bunker pipe-lines,even according to the severe rules of the DNVPS.
Bunker Samples should be taken at a continuous rate during the entire period of bunkering. When bunkering has been completed,the sample bottle filled with the bunker sample should be sealed with the specific security seal supplied by the bunker supplier in the presence of the ship's representative.
The sample bottle with the bunker sample should be kept under the ship's control until the consumption of the fuel oil, and for a period of at least 12 months from the day of delivery.
Fuel line sampler is used for taking samples of fuel or chemicals from pipe-line lines in a quick and safe manner.
The Drip Samplers range covers wide range of pipeline / flange sizes.
Each sampler consists of:
stainless steel sampler body
stainless steel needle valve
stainless steel securing cap
security pin and lock
Optionally cubitainers of 5 and 10 L with caps can be delivered with samplers or separately.
Bunker Sampler Advantages And Characteristics
Bureau Veritas (BVQ I 's) Type Approval.
Applicable for pipes with an inner diameter of 3" to 12".
Complete unit includes mounting materials and joint.
Complies with ASTM D 4057 & PSA regulations.
Light weight.
easy to install and easy to operate
The actual sampler is a Stainless Steel pipe with small holes.
Can be used within the bolt ring of any flange
Cost effective
When ordering the CHNTAINER BUNKER SAMPLER
the following technical information should be provided by the ship:(e.g.,for flange type of bunker sampler)
(D) Diameter of through holes
(J) Internal Diameter
(P) Pitch Centre Diameter
(O) Outer Diameter
(N) Number of Holes
Related Fuel drip bunker sampler products:
Bunker sampler plug,Metal cap plug,Nylon plug,Nylon adaptor for probe,Nylon cap for probe,
Rubber gasket,Plastic plug,Perforated probe with needle valve & connection,Sampler size,
Sampling equipment,Sampling procedures,Sampling systems,Sampler Converter Bobbin,
Sampler Gauge,Sampler flange,Sampler strip,Sampler probe tube,Stainless steel flange,
Security cap,Valve Lock,bunker sampler bottles,bunker sampler cubitainers
6 inch DN150 Fuel Drip Bunker Samplers CFD-FS-S-150F Bunker Manifold Flange Size:
IMPA:651328
Pitch Centre Diameter(C) : 241.3 mm
Internal Diameter (B) : 170 mm
Outer Diameter (A) : 279.4 mm
Diameter of through holes (D) : 23 mm
Number of Flange Holes: 8
The CFDPLAS BUNKER SAMPLER is approved by the Classification(BVQI) and has been manufactured in compliance with the above regulations.FengDi Plastic Technology has constructed sampling systems for this purpose with which samples from the bunker pipe-lines,even according to the severe rules of the DNVPS.
Bunker Samples should be taken at a continuous rate during the entire period of bunkering. When bunkering has been completed,the sample bottle filled with the bunker sample should be sealed with the specific security seal supplied by the bunker supplier in the presence of the ship's representative.
The sample bottle with the bunker sample should be kept under the ship's control until the consumption of the fuel oil, and for a period of at least 12 months from the day of delivery.
Fuel line sampler is used for taking samples of fuel or chemicals from pipe-line lines in a quick and safe manner.
The Drip Samplers range covers wide range of pipeline / flange sizes.
Each sampler consists of:
stainless steel sampler body
stainless steel needle valve
stainless steel securing cap
security pin and lock
Optionally cubitainers of 5 and 10 L with caps can be delivered with samplers or separately.
Bunker Sampler Advantages And CharacteristicsBureau Veritas (BVQ I 's) Type Approval.
Applicable for pipes with an inner diameter of 3" to 12".
Complete unit includes mounting materials and joint.
Complies with ASTM D 4057 & PSA regulations.
Light weight.
easy to install and easy to operate
The actual sampler is a Stainless Steel pipe with small holes.
Can be used within the bolt ring of any flange
Cost effective
When ordering the CHNTAINER BUNKER SAMPLER
the following technical information should be provided by the ship:(e.g.,for flange type of bunker sampler)
(D) Diameter of through holes
(J) Internal Diameter
(P) Pitch Centre Diameter
(O) Outer Diameter
(N) Number of Holes
Related Fuel drip bunker sampler products: Bunker sampler plug,Metal cap plug,Nylon plug,Nylon adaptor for probe,Nylon cap for probe,
Rubber gasket,Plastic plug,Perforated probe with needle valve & connection,Sampler size,
Sampling equipment,Sampling procedures,Sampling systems,Sampler Converter Bobbin,
Sampler Gauge,Sampler flange,Sampler strip,Sampler probe tube,Stainless steel flange,
Security cap,Valve Lock,bunker sampler bottles,bunker sampler cubitainers
6 inch DN150 Fuel Drip Bunker Samplers CFD-FS-S-150F Bunker Manifold Flange Size:
IMPA:651328
Pitch Centre Diameter(C) : 241.3 mm
Internal Diameter (B) : 170 mm
Outer Diameter (A) : 279.4 mm
Diameter of through holes (D) : 23 mm
Number of Flange Holes: 8
