Audited Supplier
Plastic corrugated pipes can be classified into "HDPE (high-density polyethylene) corrugated pipes", "PVC-U (unhardened polyvinyl chloride) corrugated pipes", and "PP (polypropylene) corrugated pipes" according to the materials used in the production of plastic corrugated pipes. Tube" and so on. Since the hole of the plastic corrugated pipe product is in the trough and is elongated, it effectively overcomes the drawbacks of flat-walled perforated products that are easy to be blocked and affect the drainage effect. The structure is reasonable, so that the pipe has sufficient compressive and impact resistance. According to the different structure of the plastic corrugated pipe, the corrugated pipe can be divided into single-wall corrugated pipe and double-wall corrugated pipe. Single-wall corrugated pipe refers to a pipe in which the inner and outer walls of the plastic pipe are corrugated.
1. Unique structure, high strength, compression and impact resistance.
2. the connection is convenient, the joint is well sealed, and there is no leakage.
3. light weight, quick construction and lower cost.
4. The buried service life is more than 50 years.
5. Polyethylene is a hydrocarbon polymer with non-polar molecules and resistant to acid and alkali corrosion.
6. The raw materials are green environmental protection materials, non-toxic, non-corrosive, non-scaling, and can be recycled and used.
7. The use temperature range is wide, the pipe will not break in the environment of -60ºC, and the temperature of the conveying medium is 60ºC.
8. The comprehensive project cost is basically the same as that of the concrete, and the operating cost is low.
9. No foundation is needed if the soil quality is good.
Unit: mm
Application areas:
1. Drainage and sewage shall be buried under municipal engineering and residential quarters;2. Highway pre-buried pipelines; irrigation and drainage of farmland water conservancy and waterlogging; chemical and mine for
fluid transportation, etc.
