Audited Supplier
CABLE
Insulated
Stranded
Overhead
Aluminum
PVC
XLPE
Round Wire
Overhead
ISO9001
Zoom Link
XLPE or PE, PVC
1-5 Cores
Manufacture
600-1000V
Free
5000m
100% Test Each Drum
Ok
Coil or Drum
30 Days
30%
ZML
Drum
16sq mm to 120 sq mm
China
8544492100
Product Description
600v cable xlpe insulation autoportantes 2x50
APPLICATION
ALUMINIUM NF C 33-209 service bundled conductors are used for tributary networks of power buildings and their internal networks.
CHARACTERISTICS
The bundled conductor cables have aluminum conductors, insulated with XLPE, they have good durability and thermal resistance.
Some other important cable characteristics are :
Ultraviolet radiation resistance,
Ozone resistance,
High dielectric strength,
Light and easy to handle.
INSTALLATION
The NF C 11-201 standard´s procedures determine the installation procedures for low voltage overhead lines.
These cables are NOT ALLOWED to be buried, even in conduits.
MARKING
Neutral :
211 NF C 33-209 211 « manufacturing number », « metric marks » ink printed.
Phase 1, 2, 3 :
the identification number is printed and embossed on insulation.
Pilot wire n°1 : continuous white line is printed on the insulation
Pilot wire n°2 : no marking
ELECTRICAL CHARACTERISTICS
Rated voltage : 0.6/1 kV
Test voltage : 4 kV AC
Resistance to voltage surges : 1.2/50µs with a positive or negative polarity and a peak value of 20 kV.
cable autoportantes
ALUMINIUM NF C 33-209 service bundled conductors are used for tributary networks of power buildings and their internal networks.
CHARACTERISTICS
The bundled conductor cables have aluminum conductors, insulated with XLPE, they have good durability and thermal resistance.
Some other important cable characteristics are :
Ultraviolet radiation resistance,
Ozone resistance,
High dielectric strength,
Light and easy to handle.
INSTALLATION
The NF C 11-201 standard´s procedures determine the installation procedures for low voltage overhead lines.
These cables are NOT ALLOWED to be buried, even in conduits.
MARKING
Neutral :
211 NF C 33-209 211 « manufacturing number », « metric marks » ink printed.
Phase 1, 2, 3 :
the identification number is printed and embossed on insulation.
Pilot wire n°1 : continuous white line is printed on the insulation
Pilot wire n°2 : no marking
ELECTRICAL CHARACTERISTICS
Rated voltage : 0.6/1 kV
Test voltage : 4 kV AC
Resistance to voltage surges : 1.2/50µs with a positive or negative polarity and a peak value of 20 kV.
cable autoportantes
| Nominal Cross Section | Minimum Breaking Load | current Rating in Air | Nominal Over all Diameter | Total Weight | Outer Diameter |
| mm2 | Kn | A | mm | kg/km | mm |
| 2×16RM | 1.910 | 2.5 | 72 | 147 | 15.6 |
| 2×25RM | 1.200 | 4.0 | 107 | 208 | 18 |
| 2×35RM | 0.868 | 5.5 | 132 | 277 | 20 |
| 2×50RM | 0.641 | 8.0 | 165 | 361 | 23.5 |
| 4×16RM | 1.910 | 2.5 | 72 | 286 | 18.8 |
| 4×25RM | 1.200 | 4.0 | 107 | 430 | 21.2 |
| 4×35RM | 0.868 | 5.5 | 132 | 553 | 24.1 |
| 4×50RM | 0.641 | 8.0 | 165 | 746 | 27.8 |
| 4×70RM | 0.443 | 10.7 | 205 | 1.009 | 31.8 |
| 4×95RM | 0.320 | 13.7 | 240 | 1.332 | 37.8 |
| 4×120RM | 0.253 | 18.6 | 290 | 1.632 | 54.4 |
| 4×35+1×35RM | 0.868/0.868 | 5.5/5.5 | 132/132 | 694 | 30 |
| 4×50+1×25RM | 0.641/1.200 | 8.0/4.0 | 165/107 | 814 | 31.9 |
| 4×50+1×35RM | 0.641/0.868 | 8.5/5.5 | 165/132 | 845 | 31.9 |
| 4×70+1×25RM | 0.443/1.200 | 10.7/4.0 | 205/107 | 1.105 | 36 |
| 4×70+2×25RM | 0.443/1.200 | 10.7/4.0 | 205/107 | 1.217 | 40 |
| 4×70+1×35RM | 0.443/0.868 | 10.7/5.5 | 205/132 | 1.15 | 36.2 |
PLEASE SEND YOUR ENQUIRY !!!
