Audited Supplier
SSR-1 AA
Solid State Relay
Car Relay, Household Appliances Relay, Communication Relay, Lathe Relay
1
Ac
High Power Relay
Sealed Relay
Electronic Type
Miniature
Electric Parameter Relay
Solid State Relay
24-480VAC
5-20mA
AKMAN
Standard Packing
customized
Zhejiang China
Product Description
60AA 80AA 100AA 120AA Relay Single Phase AC Control AC Solid State Relay
Technical Parameters
| Model | SSR-1 A4810/A4825/A4840/A4860/A4880/A48100/A48120 |
| Control Voltage | 70-280VAC |
| Min Control Current | 5mA |
| Max Control Current | 20mA |
| Load Voltage | 24-480VAC |
| Load Current | 10A/25A/40A/60A/80A/100A/120A |
| Insulation Resistance | 1000M Ohm/ 500VDC |
| Off Leakage Current | <=5mA |
| On Voltage | <=1.6V |
| On-off Time | <=10ms |
| Ambient Temperature | -30~+70 ºC |
| Mounting Method | Screw fixed |
Notice for operation of solid state relays
Input control signal:
The input control frequency of AC solid state relay should not exceed 10Hz; the period for DC solid state relay to control signal should
more than 5 times of the summation of making time and breaking time of relay. When the ambient is too high, please decrease the control
current appropriately, and when the ambient is too low, please increase the control current appropriately. Try to shorten the input line
and adopt twin line or twisted pair wire to reduce the radio frequency interference. When there are contactor or automatic switch exists,
you can parallel connect capacitance or RC circuit that series connected with resistance and capacitance on the input terminal, or
series connected with electromagnetic filter and filter circuit that made by LC to prevent from error connection caused by electromagnet
interference.
Output protecting circuit:
In the actual application, non-resistance load is used often, please add corresponding protecting circuit, such as quick-acting fuse,
transient suppressing circuit (absorption circuit), voltage dependent resistor MOV and discharging appliance, etc.,
Product details
Wiring diagram
Select the heat sink
Q1.Are you a factory or trading company ?A:We are a factory founded in 2010 and have over 10 years'OEM and international trading experience .
Q2.What's your main product?
A:Our main products are time Relay, voltage Relay, motor protector, current relay,solid state relay
Q3.Do you accept OEM or ODM?
A:Of course.
Q4.What's your main payment term?
A:T/T ,LC ,D/P.
Q5.Any quality guarantee or after-sales service?
A:All the products have 2 years' Guarantee. If any quality complaint , we will give out solution within 5 days
Q6.Can sample fee be returned back to me ?
A:Sample amount can be deducted from your bulk order payment when order quantity is over 1000 pieces at the first time.
