Audited Supplier
HD-P60V30A1CH
1year
12months
Battery Tester
All
Lithium-ion Battery
Customized
Customizable
RJ45, Can, 485
10 Ms
0-120V
50-60Hz
±0.05%
Over 92%
Rj45webline and AC Cable
hongdian
Wooden Case
SIZE: 416mm X 255mm X 235mm
China
9030339000
Product Description
Testing Machine Charging and Discharging Battery Tester Aging Cabinet for Lithium Batteries Pack
I.hondian introductionBattery charging and discharging tester is a special instrument for testing lithium battery pack, lead-acid battery pack, portable mobile power module and other battery packs with full series voltage 30V, 60V, 100V, 120V, using the current advanced test technology theory, and has made a series of breakthroughs in the research and application of new technologies, new components, new materials and new processes. It is designed according to the requirements of relevant national testing and maintenance regulations, and is a special testing instrument for fixed battery performance testing. It has the advantages of large discharge power, small size, light weight and complete functions of data management software of upper computer, which can greatly reduce the workload of daily testing and maintenance of fixed battery.
Voltage, current,number of channels and other parameters are customizable! This mode for your referrence, any details contact us!
| Technical Specification | |||
| Model number | HD-P60V30A-01CH | ||
| Environmental condition | |||
| 1,Temperature | Operating temperature range | 0ºC ~ 45ºC | |
| Storage temperature range | -10ºC ~ 50ºC | ||
| 2,Humidity | Operating humidity range | ≤70%RH(Vapourless condensation) | |
| Storage humdity range | ≤95%RH(Vapourless condensation) | ||
| Ac input parameter | |||
| 1,Input power supply | AC380V±15% 50/60±5Hz | ||
| 2,Power factor | ≥99%(Full load) | ||
| 3,Total Harmonic Current Distortion | THDI | ≤5%(Full load) | |
| 4,Input impedance | ≥1MΩ | ||
| 5,Input power | 3.8KW | ||
| 6,Overallefficiency (Max) | ≥92%(Full load) | ||
| 7,Noise | ≤75dB | ||
| 8,Cooling mode | Forced air cooling | ||
| 9,level of protection | IP20 | ||
| Dc output parameter | |||
| 1.Channel | channels | 1 | |
| Singlechannelpower | 1.8KW | ||
| Total output power | 1.8KW | ||
| 2,Voltage | Range | Charging:0V ~ 60V; discharging:6V ~ 60V | |
| Accuracy | ±0.05%FS | ||
| Resolution | 1mV | ||
| 3,Current | Range | -30A ~ 30A | |
| Accuracy | ±0.05%FS | ||
| Resolution | 1MA | ||
| 4,The time | Current response time | 5ms(10%FS ~ 90%FS) | |
| conversion time | Charging &discharging : 10ms(-90%FS ~ 90%FS) | ||
| 5,Channel control mode | All channels can be controlled independently | ||
| 6,Dc internal resistance test | Current, power can edit 2 sections of current, running time, sampling time, cycle times, support custom DCIR calculation | ||
| 7,Impulse testing | Support mode | Constant current/power charging and discharging | |
| Minimum pulse width | 50ms | ||
| 8,Condition simulation test | Peak working steps | No limit | |
| Minimum pulse width | 50ms | ||
Basic performance:
♦Charging function: with constant current and constant voltage charging function
♦Discharge function: with constant current discharge function
♦Charge and discharge interface: fully meet the requirements of the same port and separate port for charging and discharging the battery pack, that is, 2 wires (P+ P-) and 3 wires (P+ P- C-), and can age the positive electrode to protect the negative plate from discharging Protection type power tool battery (CH+ P+ P-)
♦Check voltage protection: by charging and discharging the battery, can check whether the battery's charge protection and
discharge protection work.
♦Record the charge and discharge capacity: charge and discharge the battery, and record the charge and discharge capacity of the battery.
♦Safety protection: anti-reverse connection protection function; voltage upper and lower limit setting protection; safe discharge current protection.
♦Serial port connection mode: If the instrument is single or less than 3, it can be connected to the PC through the serial port, which can reduce the complexity of using the instrument.
♦Network connection mode: If there are more than 3 instruments, the network connection mode can be used. The PC computer only needs to provide a network port to control less than 60 instruments.
♦Control system: The software system of the aging instrument adopts the classic and mature C/S mode, and the communication mode is serial port and network.
♦Management software: Based on Windows operating system, using SQL database to store test data, which greatly facilitates the staff to query and export data online. According to the battery bar code, time, and device number, you can view the charge and discharge aging curve, and you can also export the curve.
