Audited Supplier
DCP Vertical Dry Claw Vacuum Pump:
DCP Vacuum Pump is a high cost-effective environmental protection vacuum pump by self-dependent innovation and develop,which base on numerous foreign vacuum pump.
Working Principle:
Dry Claw Vacuum Pump is variable volume vacuum pump, pumping vacuum by volume change from big to small, and small to big. When rotors locate at the initial position, S chamber volume get small, start suction air. When rotors start reverse running, S chamber get bigger, T chamber smaller. With rotors' running, S chamber get big, suction more and more air. T chamber get small, connect outlet hole, start exhaust. Rotors' running make T chamber get small, gas get maximum compression.S chamber get biggest, suction air get end.The vacuum space consist of two claw rotors and pump body get smaller and samller with driving by synchronous gear, gas exhaust and enter next stage,then another stage,still finall stage, or atmosphere, front end produce high vacuum.
Applications:
Petroleum Industry: distilling, reduced pressure evaporating, vacuum drying, negative pressure concentrating, oil vapor recovery, adsorbtion/desorption, bio-fuel, inflammable gas, corrosive gas, chemical reaction absorption etc.
Pharmaceuticals Industry: crystallizing, distilling, subliming, drying, vacreation, polymerization, vacuum evaporation, negative pressure filtration, monomer recovery, adsorbtion/desorption, material conveying, corrosive medium, ethylene oxide disinfection etc.
Food Industry: subliming, drying, dewatering, vacuum evaporation, vacuum preservation, vacuum paskage etc.
Aeronautics & Astronautics: braze welding, vacuum coating, electron beam welding, wind tunnel test, space environment simulation etc.
Research Institutes: rotary evaporateion, distilling, rectification, polymerization, negative pressure extraction filtration, vacuum drying, pilot-plant, wind tunnel test, vacuum environment simulation etc.
| Model | DCP50 | DCP70 | DCP110 | DCP150 | DCP200 |
| Pumping Speed(L/S) | 50 | 70 | 110 | 150 | 200 |
| Max Vacuum(Pa) | 50 | ||||
| Motor Power(Kw/Hp) | 5.5/7.5 | 7.5/10 | 11/15 | 18.5/25 | 22/30 |
| Rotating Speed(RPM) | 3000 | ||||
| Working Voltage(V/HZ/P) | 220-460/50/3 or 220-460/60/3 | ||||
| Structure | Vertical | ||||
| Inlet Hole | DN80 | DN100 | |||
| Outlet Hole | DN50 | DN80 | |||
| Cooling Method | Water Cooled | ||||
| Noise(dB) | 78 | 80 | |||
| Dimension(LxWxH,MM) | 850x700x1466 | 850x700x1645 | 850x700x1684 | 850x700x1772 | 850x700x1836 |
| Remark: 1L/S=3.6m3/h,1L/S=2.119CFM. 1Pa=0.01mbar,1Pa=0.001Kpa, 1Pa=0.0075Torr, 1Pa=0.000145PSI,1Pa=0.00001Bar. | |||||
1. High ultimate vacuum, match with unit, can get better vacuum degree,
2. Low power consumption, fully start under atmospheric conditions,
3. Stronger adaptation, can pumping contain less dust and corrosive gas,
4. Good environmental protection, no industrial waster water,lower environmental protection cost.
5. Good seal, using magnetic drive seal, which can pumping radioactive substance,
6. High safety, contactless inner design, no friction,
7. Low maintain cost, with an average of 20,000 hours of trouble-free work,
8. Compact structure, small size, easy to install, 9. Solvent recovery, organic solvent recovery, maximum economic value, reduce emissions.
Q1: If I want to inquiry, what can I need to offer?
A1: Please tell us your Working Vacuum Degree(Pa,mbar or torr), Flowrate(L/S or M3/H) and Usage.
Q2: Do you have MOQ?
A2: 1Pcs is ok,if you have more quantity, the price will be cut down.
Q3: How long to delivery?
A3: We need about 4-5 weeks to produce,then extra need about 5-7 days to arrange domestic delivery and port clearence.
Q4: What is your payment term?
A4: 50% for prepayment, then the balance should paid before delivery, by TT.
Q5: How long for the warranty?
A5: 1 year for whole machine, the effective date of warranty should be counted from one month the goods arrived in client's site. If the pump go wrong, the client can choose back the pump to factory repair,or we offer remote technical support.
