Audited Supplier
Self-Propelled Economical Vertical Lift
Self-Propelled Economical Vertical Lift is is light and exquisite, convenient and flexible. It can pass through the general foyer, can enter and exit the elevator at will, save energy and electricity, and work without hurting the ground. It can be used for wall-mounted work and exploration work, and is widely used in hotels, hotels, hospitals, stations, airports, warehouses and other occasions.
Safe and reliable operation performance, the base pothole protection device gives you a hundred times peace of mind
Specification
Swivel Turning Type
| Model | MG600-1 | MG750-1 | MG750-2 | MG900-2 |
| Lift Capacity | 125Kg | 125Kg | 200Kg | 150Kg |
| Platform Height Max | 6m | 7.5m | 7.5m | 9m |
| Stowed Length | 1.36m | 1.36m | 1.5m | 1.5m |
| Stowed Width | 0.79m | 0.79m | 1.0m | 1.0m |
| Stowed Height | 1.98m | 1.98m | 1.99m | 1.99m |
| Platform Size | 0.78*0.70m | 0.78*0.70m | 1.00m*0.70m | 1.00m*0.70m |
| Ground Clearance | 0.05m | 0.05m | 0.05m | 0.05m |
| Wheelbase | 1.15m | 1.15m | 1.28m | 1.28m |
| Gradeability | 25% | 25% | 25% | 25% |
| Maximum Working Slope | 1.5° | 1.5° | 1.5° | 1.5° |
| Driving Wheel | 0.23*0.08m | 0.23*0.08m | 0.25*0.08m | 0.25*0.08m |
| Front Tire | 8in | 8in | 8in | 8in |
| Driving Motor | 0.4Kw | 0.4Kw | 0.5Kw | 0.5Kw |
| Lifting Motor | 2Kw | 2Kw | 2Kw | 2Kw |
| Power Source | 2*12V/120Ah | 2*12V/120Ah | 2*12V/120Ah | 2*12V/120Ah |
| Charger | 24V/12A | 24V/12A | 24V/12A | 24V/12A |
| Weight | 850Kg | 880Kg | 1100Kg | 1250Kg |
Hydraulic Turning Type
| Model | MG600-1S | MG750-1S | MG750-2S | MG900-2S |
| Lift Capacity | 125Kg | 125Kg | 200Kg | 150Kg |
| Platform Height Max | 6m | 7.5m | 7.5m | 9m |
| Stowed Length | 1.44m | 1.44m | 1.55m | 1.55m |
| Stowed Width | 0.82m | 0.82m | 1.0m | 1.0m |
| Stowed Height | 2.09m | 2.09m | 2.09m | 2.09m |
| Platform Size | 0.78*0.70m | 0.78*0.70m | 1.00m*0.70m | 1.00m*0.70m |
| Ground Clearance | 0.05m | 0.05m | 0.05m | 0.05m |
| Wheelbase | 1.15m | 1.15m | 1.28m | 1.28m |
| Gradeability | 25% | 25% | 25% | 25% |
| Maximum Working Slope | 1.5° | 1.5° | 1.5° | 1.5° |
| Driving Wheel | 0.23*0.08m | 0.23*0.08m | 0.305*0.1m | 0.305*0.1m |
| Front Tire | 8in | 8in | 8in | 8in |
| Driving Motor | 0.8Kw | 0.8Kw | 0.8Kw | 0.8Kw |
| Lifting Motor | 2Kw | 2Kw | 2Kw | 2Kw |
| Power Source | 2*12V/105Ah | 2*12V/105Ah | 2*12V/105Ah | 2*12V/105Ah |
| Charger | 24V/15A | 24V/15A | 24V/15A | 24V/15A |
| Weight | 1100Kg | 1200Kg | 1350Kg | 1500Kg |
Details
Swivel Turning Type
Hydraulic Turning TypeStandard Configuration for Self-Propelled Economical Vertical Lift
- Proportional controls
- DC power supply
- Drivable at full height
- Beacon
- Non marking tyre
- 2WD
- Automatic braking system
- Anti burst valve on cylinder
- Emergency stop button
- Auxiliary lowering
- On board Diagnostic system
- Tilt sensor with alarm
- Forklift pockets
- Charger protection
- All motion alarm
- Horn
- Double wheel brake
- Hydraulic braking release
- Anti-dust cover on the mast
- Powder coating painting
Optional Configuration for Self-Propelled Economical Vertical Lift
1.AC power to platform
2.Overload sensor with alarm
3.Platform working light
4.Air tube to the platform
5.Platform extension
6.Self -lock gate on platform(Hinge type top open door)
7.Hour meter
8.Machine Body cover
9.Wireless tracking
Company Introduction
CHEN LIFT(SUZHOU) MACHINERY CO., LTD.
- Located at Suzhou City Jiangsu Province(we are the largest manufacturer in this line in Jiangsu)
- Founded in 2001
- A standardized modern factory of 11,000 square meters
- Professional organization in manufacturing, sales, services and refurbishment of hydraulic lifting machinery and aerial working platform
- Established distributor relationship with customers from over 30 countries and regions in Southeast Asia, Middle East, South America, Europe and Africa
Our belief is to produce the high quality and safety machines to our customers, and provide the high efficiency services.
Many tenacity workers, we, from different places to meet in Bestmax and group into an active team, through our effort, to maximum at everything.
Factory Equipment
Client & Factory
Client &Exhibition
Other products
Our Service
1. We can design the customized the machines based on your requirement.
2. After knowing your detailed need, the right models will be recommened to you with good price.
3. Shipment can be arranged from our port to your destination port.
4. Opetion video can be sent to you if needed.
5. Parts of machines can be sent to you by express within 7 days if needed.
