Audited Supplier
800mm
Steel Strip
Steel Strip
Vertical
6
Single Stand
Cold Rolling Mill
800mm
9000 Kn
0 ~ 900 M/Min
55kn.M
3 M/S2
2.0m/S2
Less Than 420 N by S / mm2, N / mm2 = 650 by B
800kw*2t
10t
10t
MoRan
Bulk Ocean Shipping
according to clients' requirements
Hebei Langfang
8455221000
Product Description
1. Brief Introduction
The 800 six roller reversible cold rolling mill mainly consists of uncoiler, coil car, at the beginning of the straightening machine, left roll machine, coil discharging equipment, machine device, 850mm six roller reversible cold rolling mill working machine, machine device, scroll right take machine, unloading volume device, supporting the change and system and fluid equipment (liquid pressure, equipment lubrication and lubrication technology such as) and organic composition of the instrument system, electrical, instrumentation, integration of the automation of complete sets of equipment. This work will be used in the form of the national equipment engineering contract ("turnkey").
2. Technical specification
.Material: Q195, 08AL, SPCC, SPCD, SPCE
Specifications: 225/ 300/ mills 720 long 800 mm
4. Line main motor power
The 800 six roller reversible cold rolling mill mainly consists of uncoiler, coil car, at the beginning of the straightening machine, left roll machine, coil discharging equipment, machine device, 850mm six roller reversible cold rolling mill working machine, machine device, scroll right take machine, unloading volume device, supporting the change and system and fluid equipment (liquid pressure, equipment lubrication and lubrication technology such as) and organic composition of the instrument system, electrical, instrumentation, integration of the automation of complete sets of equipment. This work will be used in the form of the national equipment engineering contract ("turnkey").
2. Technical specification
.Material: Q195, 08AL, SPCC, SPCD, SPCE
Mechanical properties: less than 420 N by S / mm2, N / mm2 = 650 by B
Thickness: 1.2 ~ 4.0mm
Width: 500 ~ 700mm
Roll diameter (internal / external): 508/1600mm
Max roll weight: 10t
1.3.2 finished product specifications
Thickness: 0.18 ~ 1.2mm
Width: 500-750mm
Roll diameter (internal / external): 508/1600mm
Max roll weight: 10t
3.Main technical parameters
3.Main technical parameters
Specifications: 225/ 300/ mills 720 long 800 mm
Work roll: 225 ~ 200 * 850
Intermediate roll: 300 ~ 270 * 780
Support roller: 720 ~ 660 * 800
Max rolling pressure: 9000 KN
Max rolling torque: 55KN.m
Wear speed: 30 m/min
Rolling speed: 0 ~ 900 m/min
Emergency stop deceleration 3 m/s2
Quick stop deceleration 2.0m/s2
Normal parking reduction rate of 1 m/s2
Work roll bending force: 150KN
Middle roll bending roll 150KN
Intermediate roll force: 250 ~ 150KN
Intermediate roll shifting: + 75 mm
Max opening degree of working roll: 20 mm (new roll)
Rolling line elevation: mm +800
Rolling line elevation adjustment stroke: 125 mm
Deflector roll diameter: 400 mm
Process flow: 3600 L/min
Hydraulic system working pressure:
AGC: 25 MPa
Bending roll: 15 MPa
General hydraulic transmission: 10 MPa
4. Line main motor power
800kw*2 total of 4 units
660V 400/1250r/min Z560-4B
| No. | Incoming thickness(mm) | Output thickness(mm) | Incoming width (mm) | Coil weight (t) | Annual output | ratio (%) |
| 1 | 2 | 0.2 | 1100 | 20 | 5000 | 2 |
| 2 | 2.3 | 0.25 | 1100 | 20 | 7500 | 3 |
| 3 | 2.75 | 0.35 | 1200 | 20 | 50000 | 20 |
| 4 | 3.0 | 0.45 | 1200 | 22 | 75000 | 30 |
| 5 | 3.0 | 0.5 | 1200 | 22 | 87500 | 35 |
| 6 | 3.5 | 0.7 | 1300 | 25 | 12500 | 5 |
| 7 | 3.5 | 1.0 | 1300 | 25 | 7000 | 3 |
| 8 | 4.0 | 1.5 | 1300 | 25 | 5000 | 2 |
| total | 200000 | 100 |
