Product Introduction


The main benefits of using 78 GHz over devices using lower frequency are:
- n Based on the self-developed CMOS millimeter wave RF chip, a more compact RF architecture, a higher signal-to-noise ratio, and a smaller blind zone are realized.
- n 5GHz working bandwidth means higher measurement resolution and accuracy.
- n 3°antenna beam angle, so the interference in the environment has less impact on the instrument, and the installation is more convenient.
- n Shorter wavelength yields good reflection properties on sloped solids, so aiming towards material angle of repose is usually not necessary.
- n Support remote debugging and remote upgrading to reduce the cost of field personnel.
Technical specifications
| Frequency | 76GHz ~ 81GHz, 5GHz FMCW bandwidth |
| Measuring range | x0: 0.3 m ~ 60m x1: 0.08m~30m x2: 0.6m ~ 120m |
| Measurement accuracy | ±1mm |
| Beam angle | 3°/6° |
| Minimum measured dielectric constant | >=2 |
| Power | 15~28VDC |
| Communication | 2x: MODBUS 3x: HART/Series |
| Signal output | 2x: 4 ~ 20mA or RS-485 3x: 4~20mA |
| Fault output | 3.8mA, 4mA, 20mA, 21mA, hold |
| Field operation / programming | 128 × 64 dot matrix display / 4 buttons PC software Bluetooth |
| humidity | ≤95%RH |
| Enclosure | Aluminum alloy, stainless steel |
| Antenna type | Lens antenna/anti-corrosive antenna / flange isolated by quartz |
| Process temperature | T0:-40~85ºC; T1:-40~200ºC; T2:-40~500ºC; T3:-40~1000ºC |
| Process pressure | -0.1~2MPa |
| Product Size | Ø100*270mm |
| Cable entry | M20*1.5 |
| Recommended cables | AWG18 or 0.75mm² |
| Protection class | IP67 |
| Explosion-proof grade | ExdiaIICT6 |
| Installation method | Thread or flange |
| Weight | 2.480Kg/2.995Kg |
| Packing box size | 370*270*180mm |
If you have any questions or want to know more details about the product, please contact us!
Certificate

Company Profile
Click here to view more information about the companyPacking & Shipping


Q1: What's your business range?
A: We manufacture PH/ORP/EC/DO/Chlorine/Turbinity meter and provide dosing pump, diaphragm pump,dosing system, pressure instrument, flow meter, level meter, dosing system and so on.
Q2: How about the quality of the managements?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you.
Q3: Can you offer OEM or design services?
A: Yes, we have our own design department and production tools. We can make OEM products according to your requirements.
Q4: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
Q5: How about warranty?
A: 12 months warranty.
More information please contact us, we will provide the timely feed








Audited Supplier










