Audited Supplier
868MHz, Max. 1000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; light weight, small size, protable;
Designed for routers, IP camera, Bluetooth, walkie-talkie, drones,rc drone flight controller ZigBee,security camera system extend wireless signal range.
Cell phone Amplifier Description: 1000mW 868Mhz 30dBm WiFi Signal Booster
| Model | SH08Gi1000 |
| Operating Range | 863~870 MHz |
| Channel width | 1~20Mhz |
| Operating Mode | Bi-directional, half-duplex, time division duplex |
| Connector type | To radio SMA female (hole inside). To antenna RP-SMA female (pin inside) . |
| Input power | 0~23 dBm |
| Transmit gain | 24 dB typical |
| Output Power | 1W (30dBm) |
| Receiver Gain | 16 dB typical |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Power supply | 12V/2A DC, 100~240V |
| Operating Temperature | -20°C to + 70°C |
| Operating Humidity | Up to 75% relative humidity |
| LED light | Power status / activity status LED |
| Material | Cast Aluminum |
| Booster Size | 9.7 x 6.4 x 1.7cm |
| Booster Weight | 133g |
Package contents:
1 x SH09Gi1000 WiFi booster
1 x power supply
All specifications of PA can be customized based on customer requirement.
Product Description:
WiFi booster amplifier sunhans wifi amplifier compatible with any type of 868MHz transmitter andand receiver,1000mW (30dBm) high output power for home office wireless signal coverage, for routers, IP camera, Bluetooth, walkie-talkie, drones,rc drone flight controller ZigBee,security camera system extend wireless signal range.
Model: SH09Gi1000
[About Input power of Booster]
(output power of the device = input power of the amplifier),
Sunhans SH09Gi1000 booster input power 0~23dBm(18~19dBm will better),if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know,we will give the suggestion to solove this question according to your actual situation.
[Maximum Output power]
In ideal situation,the max output power can be up to 1W(30dBm).This amplfier will boost the receive and transmit (RX and TX) power of your wireless device to about 30dBm.
After connected with Booster,the output power at the antenna end is transmit gain of booster + Output power of the device - Signal loss of Cable/Connector.
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
