Audited Supplier
TL3000
Gear Teeth Ring
Non-Asbestos
Industrial Clutch
ISO/TS16949, IATF-16949, ISO9001
Gear Teeth Ring
Gear Teeth Ring
North America, Africa
Power Transmission
Petrochemical Industry
Desch Brake
8 Inch
51 Teeth
8.75*5.53*0.44 Inch
222.25*140.5*11.1mm
TALFRI
Pallet
as required
China
8483900090
Product Description
| Product Description: | ||
| TL3000 is a Non Asbestos Woven Laminated Sheet with exceedingly high hardness and | ||
| strength. The material is woven from Kevlar, glass fiber and other synthetic fabric yarns containing brass wire. After being impregnated with special resin and pressed into rigid flat sheet, the material shows outstandingly good resistance to wear and compression and excellent stability.TL3000 can be processed into gear teeth facing due to its high hardness and strength. | ||
| Applications: | ||
| TL3000 is a heavy duty material extensively used in oil drilling and wind power industry. It can | ||
| be installed in industrial brake and clutch system,PTO,power transmission system and electric | ||
| magnetic brake engine. | ||
| Dimension: | ||
| Length x Width: 500mm x 500mm (20 inches x 20 inches) | ||
| Thickness:3.2mm-25.4mm ( 1/8inch - 1 inch) | ||
| We have the ability to produce special shape parts by mould or machining. Pls do not hesitate to contact us. | ||
| Frictional Properties: | ||
| Normal | 0.47 | |
| Hot | 0.45 | |
| Static @200°F | 0.47 | |
| Static @400°F | 0.48 | |
| Mechanical properties: | ||
| Tensile Strength | 4300psi | |
| Compression Strength - | 20300psi | |
| Direct Shear Strength | 4700psi | |
| Recommended Operating Range: | ||
| Max. Pressure, psi | 300 | |
| Max. Rubbing Speed, ft/min | 5000 | |
| Max. Intermittent Temperature | 600°F (315°C) | |
| Max. Continuous Temperature | 550°F (287°C) | |
