Audited Supplier
CL07
Black
Indoor
CE
Without Automatic Thermostat
Without Remote Control
With Overheating Protection
Modern
Freestanding
Wood Fireplace,Stove
Metal
32PCS
68PCS
Vermiculite
Precise
Carton with Pallet
1103*598*438mm
China
7321890000
Product Description
| Product Name | WOOD BURNING STOVE | ||
| Item No. | CL-07 | ||
| Normal thermal output | 8kw (27500BTU) | ||
| Thermal efficiency | 75% | ||
| CO(@13%O2) | AVG4950ppm | ||
| Stove Material | Stainless Steel, Siliceous Refractory Brick | ||
| Heigh*Width*Depth | 1103mm*598mm*438mm | ||
| Net weight | 140KGS | ||
| Draft Type | Tertiary Air Inlet,Tertiary Burning | ||
| Flue Pipe Material | Carbon Steel | ||
| Room heating capacity | 73-186 m³ | ||
| Color | Black | ||
| Stove Feature | Ceramic Glass & High Temp Paint | ||
| Flue pipe outlet diameter | φ150mm or φ180mm | Wood dimension | φ60×300mm |
| Flue gas temperature (max) | 390ºC | Flue gas mass flow | 9.8g/s |
Frequently Asked Questions
1 Do stoves require a chimney? All of our multi fuel and wood burning stoves require a suitable chimney or professionally installed flue system.
2 How do I clean the chimney? You will require a chimney sweep to clean the chimney. It is essential to provide a dedicated chimney cleaning access door when installing the flue of the stove in some situations. In other situations the chimney can be swept through the firebox.
3 Who should install my stove? Our Stoves want you to enjoy the maximum performance from your appliance. To ensure this, it is essential that they are installed correctly. We strongly recommend that your stove is installed by a suitably qualified installer .
5 What warranty do I get? Our Stoves will replace, free of charge, any working part that fails (under normal operating conditions) within 12 months of purchase. Consumables such as glass, firebox lining boards or stove rope and adhesives are not guaranteed.
6 Where can I get spare parts? Your local Stove retailer will be pleased to supply spare parts and to provide any other information you require.
7 Can the doors be left open while burning? For safety and heat efficiency the doors should remain closed.
8 Why is the stove smoking when lit? A flue with back draught problems is almost certainly the cause of a smoking stove. Also check adequate ventilation is present. A qualified fitter should complete both a smoke pressure and flow test prior to fitting the stove to ascertain the integrity of the flue.
9 Why should I "Run in" my stove? To begin, light a series of small fires over a period of a few days to allow the paint finish to cure. The stove is finished with a highly heat resistant paint. The finish can be renovated with stove paint available from your local stove retailer. If the stove is not "run in" correctly, this may cause the paint to discolour and flake.
10 What is Over Firing? Your stove should never be used in a manner to cause over firing. Over firing can be caused by over loading the stove with fuel, and with primary controls open. If any part of stove glows "red" your stove is over firing and your draught control should be adjusted to restrict airflow to stove. Over firing can cause permanent damage to the appliance, which is not covered by warranty.
Company information:
