9 Cortador De Azulejos Marble Hand Tool Floor Cutting Stone Porcelain Portable Engraving Laser Construction Equipment Machinery Ceramic Tile Cutter

Item No	Stand Material	Hand/body Material	Basic Size		Guide Rail			Cut thickness	Cut Size
			Width	Thickness	material		size
T800-A172	Steel Support Stand	Aluminium Hand Steel Body	72mm	3.0 mm	201 Stainless Steel	Hollow	20x40mm	6-15mm	800mm
						Solid
T1000-A172					201 Stainless Steel	Hollow			1000mm
						Solid
T1200-A172					201 Stainless Steel	Hollow			1200mm
						Solid
T1600-A172					Steel	Solid			1600mm
T1800-A172					Steel	Solid			1800mm

Item No	Stand Material	Hand/body Material	Basic Size		Guide Rail			Cut thickness	Cut Size
			Width	Thickness	material		size
T800-A2100	Steel Support Stand	Aluminium Hand Steel Body	100mm	3.0 mm	201 Stainless Steel	Hollow	15x45mm	6-15mm	800mm
						Solid
T1000-A2100					201 Stainless Steel	Hollow			1000mm
						Solid
T1200-A2100					201 Stainless Steel	Hollow			1200mm
						Solid

Item No	Stand Material	Hand/body Material	Basic Size		Guide Rail			Cut thickness	Cut Size
			Width	Thickness	material		size
T800-A2100	Steel Support Stand	Aluminium Hand Steel Body	100mm	3.0 mm	201 Stainless Steel	Hollow	15x45mm	6-15mm	800mm
						Solid
T1000-A2100					201 Stainless Steel	Hollow			1000mm
						Solid
T1200-A2100					201 Stainless Steel	Hollow			1200mm
						Solid

Item No	Stand Material	Hand/body Material	Basic Size		Guide Rail			Cut thickness	Cut Size
			Width	Thickness	material		size
T800-A3100	Steel Support Stand	Aluminium Hand Steel Body	100mm	3.0 mm	45#Steel	Solid	20x45mm	6-15mm	800mm
T1000-A3100									1000mm
T1200-A3100									1200mm
T1600-A3100									1600mm
T1800-A3100									1800mm

Item No	Stand Material	Hand/body Material	Basic Size		Guide Rail			Cut thickness	Cut Size
			Width	Thickness	material		size
T800-A3100	Steel Support Stand	Aluminium Hand Steel Body	100mm	3.0mm	45#Steel	Solid	20x45mm	6-15mm	800mm
T1000-A3100									1000mm
T1200-A3100									1200mm
T1600-A3100									1600mm
T1800-A3100									1800mm

Item No	Stand Material	Hand/body Material	Basic Size		Guide Rail			Cut thickness	Cut Size
			Width	Thickness	material		size
T800-B172	Steel Support Stand	Aluminium Hand Steel Body	72mm	1.4mm	201  Stainless Steel	Hollow	15x45mm	6-15mm	800mm
T800-B1100			100mm						800mm
T1000-B172			72mm						1000mm
T1000-B1100			100mm						1000mm
T1200-B1100			100mm						1200mm

The new generation of all-steel tile cutting machine can easily cut polished brick, vitrified brick, antique brick, all-glazed brick, all-porcelain tile, all-steel brick, marble, microcrystalline tile (high-end microcrystalline stone glass surface greater than 0.7mm can not be cut).

Item No	Stand Material	Hand/body Material	Basic Size		Guide Rail			Cut thickness	Cut Size
			Width	Thickness	material		size
T600-B272	Steel Support Stand	Aluminium Hand Steel Body	72mm	1.4mm	201  Stainless Steel	Hollow	10x40mm	6-15mm	600mm
T800-B272						Hollow			800mm

Manual ceramic tile cutting machinery is simple, environmental protection, clean, convenient, professional, precise, high quality and efficient.

Features: No water, no electricity, no dust, no noise,successfully cut a tile in 3-5 seconds . Manual tile cutting machine no electricity, no dust, no noise, low loss. In this era of pursuing environmental protection, more and more construction personnel are aware of the serious harm caused by dust to their own health, as well as the huge impact of noise on the environment. Green manual tile cutting machine has come into people's life.       
 
 

Manual Instruction                                                  
1,Open the free foot and tighten the nut                    
 2,Adjust the size to be cut on the ruler rod, and tighten the fixing screw by hand after confirming.         
3,Put the tile on the platform.                               

4,When cutting, first pull the push rod to the back end, let the blade gently press on the tile, push forward along the main shaft to the front control groove, put the box foot on the tile, gently hit the end of the push and pull handle, the tile can be broken with the knife mark.   

Machine Characteristics                                                
 1;Fast cutting speed, several seconds to complete the job;       
2;Good cutting effect, brick cutting straight, no collapse, high precision, smooth edge;
3;Low cutting cost, a cutter wheel can cut 50,000 to 70,000 meters;

4;No electricity, no water, no noise, no dust;

5,The operation is simple, convenient and safe.

When cutting, the thinner and shallower the cut marks, the more beautiful the edge of the tile will be after cracking. On the contrary, the deeper and thicker the cut marks, the more oblique and ugly the edge of the brick. Therefore, the force must be light when pushing, but the scratches on the tile can not be interrupted, otherwise, the tile will appear collapse Angle phenomenon.
 

Manual ceramic tile cutting machinery is simple, environmental protection, clean, convenient, professional, precise, high quality and efficient. Features: No water, no electricity, no dust, no noise,successfully cut a tile in 3-5 seconds . Manual tile cutting machine no electricity, no dust, no noise, low loss. In this era of pursuing environmental protection, more and more construction personnel are aware of the serious harm caused by dust to their own health, as well as the huge impact of noise on the environment. Green manual tile cutting machine has come into people's life.


Manual Instruction
1) Open the free foot and tighten the nut
2) Adjust the size to be cut on the ruler rod, and tighten the fixing screw by hand after confirming.
3) Put the tile on the platform.
4)When cutting, first pull the push rod to the back end, let the blade gently press on the tile, push forward along the main shaft to the front control groove, put the box foot on the tile, gently hit the end of the push and pull handle, the tile can be broken with the knife mark.

Machine Characteristics

1)Fast cutting speed, several seconds to complete the job;
2)Good cutting effect, brick cutting straight, no collapse, high precision, smooth edge;
3)Low cutting cost, a cutter wheel can cut 50,000 to 70,000 meters;
4) No electricity, no water, no noise, no dust;
5)The operation is simple, convenient and safe.

Attention
1)When cutting, the thinner and shallower the cut marks, the more beautiful the edge of the tile will be after cracking. On the contrary, the deeper and thicker the cut marks, the more oblique and ugly the edge of the brick. Therefore, the force must be light when pushing, but the scratches on the tile can not be interrupted, otherwise, the tile will appear collapse Angle phenomenon.
2)Can only cut straight lines.

Frequency Asked Question

1.Are you the manufacturer or trading company?
We are the manufacturer.

2.Where is your factory?
It is located in YONGKANG City,Zhejiang Province,China.

3.What's the terms of trade?
FOB,CFR,CIF or EXW are all acceptable.

4.What's the terms of payment?
T/T,L/C at sight or cash.

5.What's the lead time?

In 15 days on receipt of deposit .

6.Do you accept sample order?
Yes,we accept.

7.What about the cost of sample?
 You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.