Audited Supplier
1. Features
200mm kevlar edge
Composition of cotton, synthetic and IFDY
High moisture absorption and release; Low noise and high speed
Woven structure, anti-skidding
2. Introduction
Corrugator belt also named Corrugated board conveyor belt.
Corrugator belt is for corrugated board production line and developed specifically for Double Facer. Corrugator belts consistently keep the fastest absorption & release of moisture, which secures high-quality cardboards with less consumption of heat and energy, and higher speed is assured. Corrugator belts have been specially developed for the transport of board and optimization of the drying process, they resist the stress continuously and achieve as long a life as possible.
3.Technical Specifications
Type | YKC-Common edge | YKK-Kevlar edge |
Thickness | (9±0.30)mm | |
Width | (1600-2800)mm | |
Heat-resistance | 240ºC | 240ºC (Kevlar Edge part up to) 350ºC |
Tensile strength | 75Mpa | |
Coefficient of friction | ≥0.4u | |
Weight per unit | (7.5 ± 0.3)kg/m2 | |
Air-permeability | 2.2m3/m2min. | |
4. Products Features
Tensile strength | Warp direction (63-75) Mpa in dry mode |
Heat resistance | Raw materials are polyester synthetic fiber, softening point≥260ºC |
Moisture absorption | Quick absorption and emission of heat, therefore cardboard can be quickly dried |
Seams | The Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness, and non-marking |
Suitability | Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards, and some particular operation modes. |
Geometrical dimension | Steady belt dimension, high weaving density, low stretching and contraction, and good contact between belt surface and cardboard. |
Service life | As long as the same products imported abroad. |
