Audited Supplier
RP093010V01
Potentiometer
Potentiometer
Throught Hole
Rotary Potentiometer
Single Connection
Laminated Type
Audio
Taowaves
TAOWAVES or Not
Carton
9mm
China
Product Description
9mm Rotary Potentiometer Insulated Shaft With Locating Point B5k 50k
RP93 Series Product Specifications
Suggestions for order
When choosing potentiometers, please pay attention to the following items:
1.External dimensions and designation.
2.Usage.
3.Nominal resistance value and permissible deviation
4.Regular pattern ofresistance.
5.Whether soft positioning is provided.
6.Rated power or operational voltage.
7. Because of constant improvement or other reasons, the designation, external dimensions and performance index ofthe actual productsmay be difterent from that in this catalogue. For any change,please see the external figure and parameters in the Specification Table attach
ed to the sample.
Our Factory
FQA:
1.What are the advantages of your factory?
Our factory has mold manufacturing workshop, plastic injection molding workshop and lathe center. 80% of the raw materials are supplied by ourselves to ensure that the quality and delivery speed are higher than those of our peers.
2.Do you support customization?
Yes, customization is supported, we need you to provide drawings, usage and requirements.
3.What is your shipping port and the term of payment ?
Ex-work or FOB Shenzhen.
30% paid in advance, 70% balance before shipment by T/T.(First transaction requires 100% payment in advance.)
4.How long is your lead time?
It will take 3workdays for samples,7-15workdays for mass production.
5.Can I get samples from you?
Small amount of samples can be provided for free, but customers need to pay for air freight themselves.
6.What's your MOQ ?
Our MOQ is 2K. If it is a small batch order, the price needs to be increased appropriately.
RP93 Series Product Specifications
| 1.Electrical Characteristics | |
| Total Resistance | B10 KΩ (Terminal1~3) |
| Rated Voltage | AC 50V DC 20V |
| Noise | Less than 100mV |
| Insulation | 100 MΩMax |
| Dielectric strength: | 1 minute at AC 250V |
| 2.Mechanical Characteristics | |
| Total ratational angle: | 280±5° |
| Rotational torque | 10~100gf.cm |
| Click Torque | 30~150 gf.cm |
| Shaft wobble: | 0.8*L/30mm p-p Max(L: mounting height) |
| Push-Pull Strength of shaft | 5KG |
| Stopper Strength | 0.3N.m(3.0kgf.cm) Min |
| 3.Endurance Characteristics | |
| Rotational life: | 10,000cycles |
| Operating temperature range: | -10ºC to +70ºC |
| Storage temperature range: | -30ºC to+80ºC |
Suggestions for order
When choosing potentiometers, please pay attention to the following items:
1.External dimensions and designation.
2.Usage.
3.Nominal resistance value and permissible deviation
4.Regular pattern ofresistance.
5.Whether soft positioning is provided.
6.Rated power or operational voltage.
7. Because of constant improvement or other reasons, the designation, external dimensions and performance index ofthe actual productsmay be difterent from that in this catalogue. For any change,please see the external figure and parameters in the Specification Table attach
ed to the sample.
Our Factory
FQA:
1.What are the advantages of your factory?
Our factory has mold manufacturing workshop, plastic injection molding workshop and lathe center. 80% of the raw materials are supplied by ourselves to ensure that the quality and delivery speed are higher than those of our peers.
2.Do you support customization?
Yes, customization is supported, we need you to provide drawings, usage and requirements.
3.What is your shipping port and the term of payment ?
Ex-work or FOB Shenzhen.
30% paid in advance, 70% balance before shipment by T/T.(First transaction requires 100% payment in advance.)
4.How long is your lead time?
It will take 3workdays for samples,7-15workdays for mass production.
5.Can I get samples from you?
Small amount of samples can be provided for free, but customers need to pay for air freight themselves.
6.What's your MOQ ?
Our MOQ is 2K. If it is a small batch order, the price needs to be increased appropriately.
