Audited Supplier
115v 230v SCR dc motor controller 110v dc motor speed controller
Model:115/230DR10AL-02
MMT-115/230DR Series DC motor driver is a kind of speed governing product developed and produced by adopting past successful experience and combining modern advanced technology. This series of products have met international standard requirements and are sold to many countries. This driver adopts thyristor chopping control principle and uses independent trigger mode. Even there is no velocity feedback, high speed ratio can be achieved to make it more accurate and reliable.
Excellent performance, reliable quality and high cost performance make it a strong performer in DC motor driver field and it was widely used in plastic machinery, food machinery, cable equipment, machining, paper printing, testing equipment, laboratory equipment and mixing equipment, etc.
Model and Product characteristics:
Max. Max. Input
output current output voltage voltage range
Model DC: (A) DC: (V) AC: (V)
90/180DR10BL-01 10 90/180 115/230
90/180DR10AL-01 10 90/180 115/230
115/230DR10BL-01 10 115/230 115/230
115/230DR10BL-01 10 115/230 115/230
| 1.SMT technology, small size |
| 2.Good following features, rapid respond speed |
| 3.Wide speed ratio, strong mechanical features |
| 4.Applicable to permanent magnet ,separate excitation type and DC torque motor |
| 5.Double closed-loop PI regulation (Voltage, current) |
| 6.Current setting and current-limiting protection (continuous operation setting current) |
| 7.Large low speed output moment |
| 8.Over-current protection function |
| 9.Quick stop function |
| 10.Arbitrary setting of upper and lower speed |
| 11.Soft start, soft stop setting function |
| 12.Selection of speed mode, torque mode |
| 13.Normally open, close selection of enable signal |
| 14.Selection of input, output voltage switch |
| 15.Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer |
Technical parameters:
Input voltage AC | 115V/230V±10% |
Frequency | 50/60HZ±5% |
Output voltage DC | 0~90V 0-110V 0-160V 0-180V 0-220V |
Rated output current | 10A |
Revolving speed ratio | 80:1 |
Output voltage accuracy | ≤0.1% |
Soft starting time | 0.2S-20S |
Soft stopping time | 0.2S-20S |
Environment temperature | -10ºC~+60ºC |
Environment humidity | relative humidity ≤65% |
Insulation voltage resistance | 1500V AC |
Insulation resistance | >500MΩ |
