Audited Supplier
TJ-CK-408L
Free Online Technical Support or on-Site Service
AC380V, Customized
CE, TUV, ISO
1 Year
OEM/ODM
20% ~ 98% Relative Humidity
+/-0.1%R.H.
+/-2.0%R.H.
+/-2.0%R.H.
-40 ~ +150 Degree
0.01 Degree
+/-1 Degree
+/- 0.5 Degree
Air Cooled / Water Cooled
TANJN
Standard Exported Fumigation Wooden Case
Guangdong, China
8479899990
Product Description
AC220v Lab Testing Machine Environmental Simulation Test Chamber Temperature Humidity Test Chamber
| Model | TJ-CK-408L | |
| Interior size W*H*D(cm) | 600*800*850mm | |
| Exterior size W*H*D(cm) | 1300*1500*1920mm | |
| Volume(Liters) | 408L | |
| Temp. Range & Humi. Range | -40ºC ~+150ºC, 20%RH ~ 98%RH | |
| Performance | Temp. fluctuation & Humi. fluctuation | ±0.2C, ±2.0%RH |
| Temp. uniformity & Humi. uniformity | ±0.5ºC~±2ºC, ±4.0%RH | |
| Temp. deviation & Humi. deviation | ±0.01ºC, ±0.1%RH | |
| Heating up rate | 3ºC/Min | |
| Cooling rate | 1ºC/Min | |
| Weight(Kg) | 180Kg | |
| Material | Interior material | Stainless steel plate(SUS 304) |
| Exterior material | Baked painting steel or stainless steel(SUS304) | |
| Insulation material | Polyethylene foam (PU foam insulation) | |
| System | Air circulation mode | Centrifugal fan - broadband forced airflow circulation (top out and bottom in) |
| Refrigeration mode | Binary compound refrigeration | |
| Condensing mode | Water-cooled or air-cooled | |
| Heater | Stainless steel plate: SUS#316 | |
| Humidifier | Semi enclosed steam humidification | |
| Water supply | Fully automatic cycle(Resistivity >500M Ω) | |
| Safety device | NFB(No fuse breaker), dry heat protector, over pressure, over heat and over current protectors for compressor, over temperature protectors, over load protector of fan,short of water protector, fuse, e-stop(emergency stop button). | |
Q: How to place order?
A: Talk to service staff, confirm machine details, after confirmed the order, we will send you PI to confirm.
Q: What is your warranty? And do you have technique support?
A: Our warranty is 1 year. We have technique support and training. We can also offer on-site serive if need.
Q: How Long is your lead time?
A: It depends on the different products. Usually 15-20 days after payment received.
Q: How to Pay?
A: We accept T/T, and Global Pay
Q: Do you provide OEM or ODM service?
A: Yes, we have over 15 years experience for OEM and ODM serivce. Add your logo on machine is also ok for us.
Q: What's the shipment ways you can provide?
A: By Air, By sea, By Truck, By Express(door to door): DHL, UPS, FedEx, TNT, SF, EMS ect.
Q: Do you provide OEM or ODM service?
A: Yes, we have over 15 years experience for OEM and ODM serivce. Add your logo on machine is also ok for us.
Q: What's the shipment ways you can provide?
A: By Air, By sea, By Truck, By Express(door to door): DHL, UPS, FedEx, TNT, SF, EMS ect.
