Audited Supplier
ADC100 12VDC 100A Reversing Solenoid Contactor in Elevator Parts Charging Pile Forklift Circuit Winch Relay*
Brand: AK/AOKAI
Name: DC Reversing Contactor
Model: ADC100(ADC400-DE)/DC88P
Rated Voltage: DC24V
Rated Current: 100A, DE400A
Connection Mode: Screw Type
Dimension: 53*82*103.2mm
Weight: About 950g | |
ELECTRIC CONTACTOR
SPECIFICATION
| Coil Rated Voltage | DC24V |
| Main Circuit Rated Current (A) | Continuous 100A, DE short work interrupted 400A |
| Main Circuit Contact Voltage Drop Of (load:100A) | ≤80mV |
| Under (20±5), Cooling Pull-in Voltage | ≤70% |
| Under (20±5), Cooling Release Voltage | ≥5%, ≤40% |
| Acceptable Fluctuation Range of Coil Voltage | ±20% |
| Electrify Time | ≤30ms |
| Disconnecting Release Time | ≤20ms |
| The Max Disconnecting Time of Contacts | ≤5ms |
| Insulation Resistance | ≥50MΩ |
| Dielectric Strength | 50Hz/60Hz 1000VAC/1min |
| Overload Current | ≤7le, ≤1s |
| Coil Consumption (W) | Continuous ≤10.0W, DE ≤28.0W |
| Electrical Life | Continuous 30,000 times, intermittent 5,000 times |
| Mechenical Life | 300,000 Times |
| Working Mode | Continuous or intermittent |
| Contacts Type | 2 NO and 2 NC |
| Contact Material | AgCdO / AgCuO |
| Starting Current | ≤4A |
| Technical Standard | GB14048.4-2010 |
Battery Powered Winches Battery Powered Winches Battery Powered Winches
USAGE ENVIRONMENT
| Altitude | ≤2Km | Amblent temperature | -25~+55 |
| International protection | IP56 | Installation type | III |
| Way to install | Any | Vibration | 2.5g(5~50)Hz |
| Impact | 50g,11ms(Half-sine wave) |
Electric Contactor Electric Contactor Electric Contactor Electric Contactor Electric Contactor
SCHEMATIC DIAGRAM
INSTALLATION DIAGRAM
Battery Powered Winches Battery Powered Winches Battery Powered Winches Battery Powered Winches
ELECTRIC CONTACTOR ELECTRIC CONTACTOR ELECTRIC CONTACTOR ELECTRIC CONTACTOR
