Audited Supplier
Product name | carbon steel sheet |
Thickness | cold-rolled:0.3-6mm hot-rolled:3-150mm |
Length | 1.2m-12m or according to customer's special request |
width | 1000-4000 mm |
Tolerance | Thickness: +/-0.02mm, Width:+/-2mm |
Material grade | Q195 Q215 Q235 Q345 SAE1002 SAE1006 SAE1008 SAE1010 AISI 1020 1030 1035 1040 1045 1050 1055 1060 1065 S25C S35C S45C S20C 65Mn 16Mn Others as your requirement |
surface | Balckface |
Standard | ASTM,DIN,JIS,BS,GB/T |
Payment terms | 30% T/T deposit in advance, 70% T/T balance |
Introduction:
Carbon steels are a category of steels with 0.12 to 2% carbon content. AISI 1045 is a medium carbon steel designed to be able to function in areas requiring greater strength and hardness. This steel possesses excellent size accuracy, concentricity, and straightness which together enable to minimize wear in high speed applications. AISI 1045 can be formed into turned, ground and polished bars that can be machined unsymmetrically with limited distortion.
Fabrication and Heat Treatment:
Heat Treatment:
AISI 1045 carbon steel can be heat treated using flame and induction hardening.
Forging:
AISI 1045 carbon steel can be hammer forged.
Applications:
The following are the application areas of AISI 1045 carbon steel:
1. Bolts 2. Studs 3. Gears 4. Axles 5. Shafts 6. Machine parts.
C45 is a medium carbon steel grade offering reasonable tensile strength. Supplied in the cold drawn or hot rolled condition, tensile properties can vary but are approximately between 500-800 N/mm². This grade can be flame or induction hardened to produce a good surface hardness with moderate wear resistance. C45 is widely used for components that require better properties than mild steel but does not justify the costs of an alloy steel. Available from stock in bar, C45 can be cut to your requirements. We also offer flame cut plates cut to your required sizes and normalised. C45 flame cut plates can be supplied surface ground or precision ground.
1. Steel Main Standard
| 08# | C8 CK8 | AISI 1008 SAE1008 | SGD1 |
| 12# | C12 CK12 | AISI 1012 SAE1012 | SGD2 |
| 15# | C15 CK15 | AISI 1015 SAE1015 | S15C |
| 17# | C17 CK17 | AISI 1017 SAE1017 | SGD3 |
| 20# | C20 CK20 | AISI 1020 SAE1020 | S20C |
| 22# | C22 CK22 | AISI 1022 SAE1022 | SGD4 |
| 25# | C25 CK25 | AISI 1025 SAE1025 | S25C |
| 30# | C30 CK30 | AISI 1030 SAE1030 | S30C |
| 38# | C38 CK38 | AISI 1038 SAE1038 | S38C |
| 40# | C40 CK40 | AISI 1040 SAE1040 | S40C |
| 45# | C45 CK45 | AISI1045 SAE1045 | S45C |
| 50# | C50 CK50 | AISI 1050 SAE1050 | S50C |
2. Chemical Composition (%):
| C | Si | Mn | S | P | |
| 08# | ≤0.10 | ≤0.10 | 0.30-0.50 | ≤0.035 | ≤0.030 |
| 12# | 0.10-0.15 | ≤0.10 | 0.30-0.60 | ≤0.035 | ≤0.030 |
| 15# | 0.13-0.18 | ≤0.10 | 0.30-0.60 | ≤0.035 | ≤0.030 |
| 17# | 0.15-0.20 | ≤0.10 | 0.30-0.60 | ≤0.035 | ≤0.030 |
| 20# | 0.18-0.23 | 0.20-0.30 | 0.30-0.60 | ≤0.035 | ≤0.030 |
| 22# | 0.20-0.25 | 0.10-0.20 | 0.75-1.05 | ≤0.035 | ≤0.030 |
| 25# | 0.22-0.28 | 0.20-0.30 | 0.30-0.60 | ≤0.035 | ≤0.030 |
| 30# | 0.28-0.34 | 0.20-0.35 | 0.60-0.90 | ≤0.035 | ≤0.030 |
| 38# | 0.35-0.42 | 0.20-0.35 | 0.60-0.90 | ≤0.035 | ≤0.030 |
| 40# | 0.37-0.44 | 0.20-0.35 | 0.60-0.90 | ≤0.035 | ≤0.030 |
| 45# | 0.43-0.50 | 0.20-0.35 | 0.60-0.90 | ≤0.035 | ≤0.035 |
| 50# | 0.40-0.55 | 0.20-0.35 | 0.60-0.90 | ≤0.035 | ≤0.040 |
3. Mechanical Properties with QT
| Yield Strength(Mpa) | Tensile Strength(Mpa) | Elongation(%) | Reduction of area | |
| 08# | ≥275 | ≥450 | ≥24% | ≥50% |
| 20# | ≥205 | ≥380 | ≥25% | 50% |
| 45# | ≥400 | ≥600 | ≥12% | 35% |
| 50# | ≥725 | ≥415 | ≥20% | 40% |
20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)
20feet container load 28tons steel plate whose length is under 5.8m
40feet container load 28tons steel plate whose length is under 11.8m
1.Professional Factory
We have our own factory with more than 10years production history in hoist equipment manufacturer.
2.High Quality
All of our products have been checked seriously:
With Chemical Composition and Mechanical Properties Analysis; Hydrostatic Test, Dimensional
and Visual Inspection, Also With Nondestructive Inspection
3.Good Prices
Competitive prices based on the same quality as we are factory supplier.
4.Fast Delivery
professional packing, avoid damage.
5.OEM Custom
Samples can be made according to your requirements before placing order.
6.Best Service
Your kind inquiry will be replied in 8 hours or 24 hours if time difference.
7.Help to Solve Problem
Specialized team make us strong support to solve your problems from purchase to application.
1.We have our own factories with advanced equipment and well trained workers.
2.We can provide factory price with trading company services.
3.We control production quality very strictly to keep none compensation and make inspection for customer during the production and loading.
4.We guarantee 24 hours online response.
5.We accept small order quantity before formal cooperation.
6.Free sample and latest price list will be offered for your evaluation.
7.During The Delivery
We will arrange the shipment with reliable service and reasonable price, all the cost will be clear for you to compare.
1. Q: Are you a manufacturer?
A:Yes, we are manufacturers. We have our own factory and our own company. I believe we will be the most suitable supplier for you.
2. Q:Could we visit your factory?
A: Sure, we welcome you to visit our factory , check our production lines and know more about our strength and quality.
3. Q: Do you have quality control system?
A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.
4. Q: Can you arrange the shipment for us?
A: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best price with earlist vessel and professional service.
5. Q: How long is your delivery time?
A: Generally it is 7days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.
6. Q: Can I get some samples?
A: We are glad to provide free samples to you, but we do not offer the freight.
7. Q: What is your after-sale service?
A: We provide after-sale service and offer 100% guarantee on our products.
8. Q: What is your MOQ?
A: 25 Tons
