Audited Supplier
ANSI 56-2
High-voltage
Porcelain
Pin Insulator
A Type Insulator
High Voltage Power Transmission, Electrical Installation
Trough Type
CE, ISO9001
Brown/Gray
NJREC or OEM
1-3/8inchs
K
17in.
56-2
Plain, Radio Freed
NJREC
Wooden Pallet
China
85462090
Product Description
Porcelain pin type insulator is mounted on a pin on the cross-arm on the pole. There is a groove on the upper end of the insulator. The conductor passes through this groove and is tied to the insulator with annealed wire of the same material as the conductor. Pin type insulators are used for transmission and distribution of electric power at voltages up to 33 kV. Beyond operating voltage of 33 kV, the pin type insulators become too bulky and hence uneconomical.
| ANSI Class/Standard | ANSI 56-2 | |
| Dimensions(ln) | ||
| Pin Hole Diameter - Inchs | 1-3/8 | |
| Minimun Pin Height | 7 | |
| Leakage Distance | 17 | |
| Mechanical Values(kV) | ||
| Cantilever Strength(lbs) | 3000lbs | |
| Electrical Values(kV) | ||
| Typical Voltage Class | 23kV | |
| Low frequency flashover | Dry | 110kV |
| Wet | 70kV | |
| Impluse flashover voltage | Positive | 175kV |
| Negative | 225kV | |
| Low frequency puncture voltage | 145kV | |
| Radio influence voltage | Test voltage to ground | 22kV |
| Max. RIV at 1000kHz | 100kV | |
| Net Weight(lb) | ||
