Audited Supplier
Gate Valve
Water
Ordinary Temperature
Straight-through
Cast Iron
Flange
Ordinary Temperature
Manual
Wedge Gate Valve
Inside Gate Valve
Emptying, Temperature Control, Flow Control
JIS
Industrial Usage, Water Industrial Usage
DN50-DN600
Plywood Cases
Epoxy Powder Coating
CE/Wras Certificate
25-30days
Available
EATHU
Plywood Case
DN50-DN600
China
8481804090
Product Description
DIN/API JIS Pneumatic Hydraulic Gear Stainless Steel 10K 150lb 300lb 316 304 Wcb Lug Slurry Ash Flange Wafer Knife Gate Valve
Simple structure: the design of knife gate valve is relatively simple, the structure consists of valve body, valve blade and valve stem, which is easy to manufacture and maintain.
Good cutting performance: the valve blade of the knife gate valve is usually flat and straight, which can effectively cut the solid particles in the fluid, so it is suitable for media with more particles.
Excellent sealing performance: knife gate valves are usually made of flexible sealing materials, which can provide reliable sealing effect and avoid media leakage.
Resistant to high temperature and high pressure: knife gate valves are made of a variety of materials, you can choose the right material according to the nature of the medium, so that it has a high temperature and pressure resistance.
Small flow resistance: because the valve piece of the knife gate valve is flat, the resistance when the fluid flows through is relatively small, suitable for occasions that require a large diameter.
Good cutting performance: the valve blade of the knife gate valve is usually flat and straight, which can effectively cut the solid particles in the fluid, so it is suitable for media with more particles.
Excellent sealing performance: knife gate valves are usually made of flexible sealing materials, which can provide reliable sealing effect and avoid media leakage.
Resistant to high temperature and high pressure: knife gate valves are made of a variety of materials, you can choose the right material according to the nature of the medium, so that it has a high temperature and pressure resistance.
Small flow resistance: because the valve piece of the knife gate valve is flat, the resistance when the fluid flows through is relatively small, suitable for occasions that require a large diameter.
| Body: | Cast Iron |
| Wedge: | GGG50+EPDM |
| Stem Nut: | Brass |
| Bonnet: | GGG50 |
| Stem: | 2Cr13 |
| Handwheel: | Q235 |
| Seal Gasket: | EPDM |
| O-ring: | EPDM |
| Positioning Ring: | Brass |
| Thrust Nut: | Brass |
| Design Standard: | BS EN1171/EN1074-2 |
| Face to face Standard: | DIN3202 F4/F5, BS5163, SABS664/665 |
| Flange Drilling Standard: | DIN3352 |
| Operator: | Handwheel,Operating Nut,Gearbox,Extension Spindle |
1)Industry leader:
Our Factory has been specilized in Pipeline Products since 2004.With decades of development, Eathu possesses 20 engineers, 200 experienced workers and 25 professional sales team and has supplied pipeline products, solution and services to over 30 countries.Quality is strictly Controlled and gauranteed.
2)Large Productivity
Our Factory' productivity is large and stock for some of the pipe fittings is also available. so the mass production lead time is short.
3)VIP Service
Professional Technical engineers and sales teams gaurantee the quality and service.
4)OEM is also available
Our Factory has been specilized in Pipeline Products since 2004.With decades of development, Eathu possesses 20 engineers, 200 experienced workers and 25 professional sales team and has supplied pipeline products, solution and services to over 30 countries.Quality is strictly Controlled and gauranteed.
2)Large Productivity
Our Factory' productivity is large and stock for some of the pipe fittings is also available. so the mass production lead time is short.
3)VIP Service
Professional Technical engineers and sales teams gaurantee the quality and service.
4)OEM is also available
Q1:What certificate do you have?
A: We have ISO 9001, CE certificate.
Q2. Can I get free samples?
A: Yes, The free samples can be offered for free.
Q3. Can I have my own Logo on the product?
A: Yes, Simple logo design is available based on not small order quantity.
Q4: Can I have my own customized product?
A: Yes, your customized requirements for color, size, mark, etc.
Q5: Can you produce the products according to my own drawing?
A: Yes, we can produce the products according to your drawing.
Q6: How long is your delivery time?
A: Generally it is about 30-45days depends on the order quantity.
Q7:What's your product range?
A:Forged Pipe Fitting,Butt welding Pipe Fitting,Pipe Clamps,Ductile Iron Groove Pipe Fitting,OEM Parts,Valves
