Audited Supplier
Oilfield drilling solid control equipment parts-- CYCLONE/HYDRO CYCLONES
Structural features: The upper part of the Cyclone Desander is cylindrical, the lower part is conical, the center of the cylinder is inserted into a overflow pipe, and the upper part has a tangential tube.
Working principle: The Cyclone Desander is to push the mixture into the cyclone with a certain pressure and generate high-speed rotation inside the cyclone.Mixture quality materials in the role of spiral downward movement, in the cone mouth eduction, lighter material quality, spiral to the centre by hydrocyclone, a vortex from the overflow mouth eduction, so as to achieve the purpose of the separation of two kinds of material.
Product use: Cyclone Desander has been applied in China for many years. Cyclone Desander is mainly used for classification of fine grain grade, pulp concentration and dewatering.
SPECIFICATION FOR HYDROCYCLONE | ||||
Specifications | Diameter(mm) | Inlet Pressure(MPa) | Capacity(m3/h) | Cut Size(μm) |
FX 660 | 660 | 0.04-0.15 | 250-360 | 74-220 |
FX610 | 610 | 0.04-0.15 | 200-300 | 74-200 |
FX500 | 500 | 0.04-0.2 | 140-220 | 74-200 |
FX400 | 400 | 0.04-0.2 | 100-170 | 74-150 |
FX350 | 350 | 0.04-0.2 | 60-105 | 50-150 |
FX300 | 300 | 0.04-0.2 | 45-90 | 40-150 |
FX250 | 250 | 0.04-0.3 | 40-65 | 30-100 |
FX200 | 200 | 0.04-0.3 | 25-40 | 30-100 |
FX150 | 150 | 0.04-0.3 | 11-20 | 30-74 |
FX125 | 125 | 0.04-0.3 | 8-15 | 20-100 |
FX100 | 100 | 0.04-0.3 | 5-12 | 20-100 |
FX75 | 75 | 0.1-0.4 | 2-5 | 5-74 |
FX50 | 50 | 0.1-0.4 | 1.5-3 | 10-30 |
FX25 | 25 | 0.1-0.6 | 0.3-1 | 2-10 |
