Audited Supplier
IADC637
Customized
DIN, JIS, AISI, API
Taper-length
Core Drill Bit
Tungsten Carbide
Well Drilling, PCB Drilling, Metal Drilling, Masonry Drilling
1 Year
97 Kgs
Provided
Provided
Brand New
Sealed Journal Bearing Bit
Available
IADC637
Available
Yes
1 PC
API & ISO
Forging
Wear Resistant,High Performance
Oil/Gas/Geothermal/Mining/Geological Survey,HDD...
Far Eastern Drilling
Plywood Case
35*32*52cm
China
84314300
Product Description
Far Eastern Drilling are API (API-7-1 & API Spec Q1) factory specializes in drill bits, such as Tricone Bit,PDC Bit,Hybrid Bit,HDD Hole Opener,Foundation Roller Cone Bits and related drilling tools,application fields includes for oil well drilling, gas well drilling, geothermal well drilling, mining, geological survey, hydrographic survey, water well drilling, HDD pipelines installation projects, foundation rock piling projects. We can offer both TCI and Steel (Milled) Tooth in a variety of sizes and all most of IADC codes in stock.
According to cutting material,tirocne bit can be divided into TCI bit and Steel Tooth Bit .
TCI is short for Tungsten Carbide Insert, tungsten carbide is regular hard material in rock drilling field, another material is diamond.
Inserts means Tungsten Carbide teeth that's fitting on cones of rotary drilling roller cone bits.API TCI tricone drill bit IADC637 have type of Rubber /Elastomer sealed bearing and Metal sealed bearing. We suggest that we had better choose metal face sealed bearing bits for deep rock wells with hard formations.For very deep well drilling, we recommend Metal-face sealed bearing tricone bits in drilling depth exceeds 1000 meters, For hard rock and long distance trenchless pilot hole drilling that length exceeds 300 meters we also recommend metal-face sealed bearing tricone bits.For water well drilling, shallow well drilling or shorter distance trenchless pilot hole drilling projects, elastomer(rubber) sealed bearing tricone bits has better cost performance.
FAQ
1. How to get an exact quotation?
Answer: Please send us detailed information as below:
-Tricone bits(Diameter, IADC code)
-PDC bits(Matrix or Steel body, blades quantity, cutter size, etc)
-Hole opener(Diameter, size of pilot hole, hardness of rocks, thread connection of your drill pipe, etc.)
-Roller cutters(Diameter of cones, model number, etc.)
-Core barrel(Diameter, quantity of cutters, connection, etc.)
A simple way is sending us photos .
Besides above, if possible please provide more information as below:
Drilling depth in vertical well drilling, Drilling length in HDD, hardness of rocks, Capacity of drill rigs, application(oil/gas well drilling, or water well drilling, or HDD, or foundation).
Incoterm: FOB or CIF or CFR, by plane or ship, port of destination/discharge.
The more information provided, the more exact quotation will be offered.
2. What is the quality control for your products?
Answer: All of our production are in lines of API rules and ISO9001:2015 strictly, from signing contract , to raw materials, to each production processes, to product finish, to after-sale service, each processes and sections are in accordant with standard.
3. About lead time,payment terms, delivery ?
Answer: We always have regular models available in stock, prompt delivery is one of our advantages. Mass production depends on quantity of order.
We accept all regular payment terms including L/C, T/T, etc.
We are near from Beijing airport and Tianjin(Xingang) seaport, transportation from our factory to Beijing or Tianjin only takes one day, fast and very economical inland charges.
4. What is the history of Far Eastern ?
Answer: The drilling bits business was started at year 2003 only for China domestic requirement, the name Far Eastern was started from year 2009, now Far Eastern has exported to more than 35 countries and areas.
5. Do you have Referenced Letters /Recommendation Letters from old customers?
Answer: Yes, we have many referenced letters/recommendation letters issued by old customers who would like to share our stories.
According to cutting material,tirocne bit can be divided into TCI bit and Steel Tooth Bit .
TCI is short for Tungsten Carbide Insert, tungsten carbide is regular hard material in rock drilling field, another material is diamond.
Inserts means Tungsten Carbide teeth that's fitting on cones of rotary drilling roller cone bits.API TCI tricone drill bit IADC637 have type of Rubber /Elastomer sealed bearing and Metal sealed bearing. We suggest that we had better choose metal face sealed bearing bits for deep rock wells with hard formations.For very deep well drilling, we recommend Metal-face sealed bearing tricone bits in drilling depth exceeds 1000 meters, For hard rock and long distance trenchless pilot hole drilling that length exceeds 300 meters we also recommend metal-face sealed bearing tricone bits.For water well drilling, shallow well drilling or shorter distance trenchless pilot hole drilling projects, elastomer(rubber) sealed bearing tricone bits has better cost performance.
Bit Description:
IADC:637-TCI journal sealed bearing bit with gauge protection for medium hard formation with high compressive strength.
Compressive Strength:
100-150 MPA
14,500-23,000PSI
Ground Description:
Hard,well-compacted rocks such as hard silica limestone,quarzite streaks,pyrite ores,hematite ores,magnetite ores,chromium ores,phosphorite ores,and granites.
IADC:637-TCI journal sealed bearing bit with gauge protection for medium hard formation with high compressive strength.
Compressive Strength:
100-150 MPA
14,500-23,000PSI
Ground Description:
Hard,well-compacted rocks such as hard silica limestone,quarzite streaks,pyrite ores,hematite ores,magnetite ores,chromium ores,phosphorite ores,and granites.
| Basical Specification | |
| Size of Rock Bit | 12 1/4 inches |
| 311.1 mm | |
| Bit Type | TCI Tricone Bit |
| Thread Connection | 6 5/8 API REG PIN |
| IADC Code | IADC 637G |
| Bearing Type | Journal Sealed Bearing with Gauge Protection |
| Bearing Seal | Elastomer/Rubber or Metal |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling deep drilling, motor drilling |
| Nozzles | Three Nozzles |
| Operating Parameters | |
| WOB (Weight On Bit) KN/mm | 0.5-1.2 |
| RPM(r/min) | 40-80 |
| Formation | Medium formation with low compressive strength ,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone,medium formation with harder and abrasive interbeds,etc. |
| Steel (Milled) Tooth Bit IADC Code | IADC111,IADC114,IADC115,IADC116,IADC117,IADC121,IADC124,IADC125,IADC126, IADC127,IADC131,IADC135,IADC136,IADC137,IADC214,IADC216,IADC225,IADC226, IADC235,IADC237,IADC314,IADC315,IADC316,IADC317,IADC325,IADC326,IADC327, IADC335,IADC336,IADC337,IADC347 |
| Tungsten Carbide Insert (TCI) Bit IADC Code | IADC417,IADC427,IADC437,IADC517,IADC527,IADC537,IADC617,IADC627,IADC637, IADC737,IADC837,IADC832,IADC415,IADC425,IADC435,IADC445,IADC525,IADC625, IADC635,IADC412,IADC415,IADC416,IADC422,IADC425,IADC427,IADC435,IADC436, IADC446,IADC447,IADC516,IADC526,IADC532,IADC535,IADC536,IADC542,IADC545, IADC547,IADC615,IADC622,IADC632,IADC635,IADC642,IADC645,IADC715,IADC722, IADC725,IADC732,IADC735,IADC742,IADC745,IADC825,IADC832,IADC835,IADC845 |
| Available Sizes | From 2 7/8 inches to 26 inches larger sizes for the hole opener bit ,reamer bit |
| Advantage | Most favorable price and best quality |
| Bearing Type | Sealed bearing / non-sealed bearing / Metal sealed bearing / Rubber sealed journal bearing / Air cooled bearing |
| Layer Details | Soft,medium soft, hard ,medium hard, very hard formation |
| Button Size/Extra Features | Button bit teeth:1) Y-Conical teeht 2)X-Chisel teeth 3)K-Wide teeth 4)Spoon tooth 5)Spherical Tooth |
| Material | Alloy steel ,Tungsten of Carbide |
| Application | oil well drilling, gas well drilling, geothermal well drilling, mining, geological survey, hydrographic survey, water well drilling, HDD pipelines installation projects, foundation rock piling projects. |
| Bit Size | API REG PIN | Torque | Weigt | |
| INCH | MM | INCH | KN.M | KGS |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200.0 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254.0 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102.0 | ||
| 12 3/8 | 314.3 | 96.0-103.0 | ||
| 12 1/2 | 317.5 | 97.0-104.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-136.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381.0 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-221.0 | ||
| 17 1/2 | 444.5 | 260.0-270.0 | ||
| 26 | 660.4 | 740.0-760.0 | ||
FAQ
1. How to get an exact quotation?
Answer: Please send us detailed information as below:
-Tricone bits(Diameter, IADC code)
-PDC bits(Matrix or Steel body, blades quantity, cutter size, etc)
-Hole opener(Diameter, size of pilot hole, hardness of rocks, thread connection of your drill pipe, etc.)
-Roller cutters(Diameter of cones, model number, etc.)
-Core barrel(Diameter, quantity of cutters, connection, etc.)
A simple way is sending us photos .
Besides above, if possible please provide more information as below:
Drilling depth in vertical well drilling, Drilling length in HDD, hardness of rocks, Capacity of drill rigs, application(oil/gas well drilling, or water well drilling, or HDD, or foundation).
Incoterm: FOB or CIF or CFR, by plane or ship, port of destination/discharge.
The more information provided, the more exact quotation will be offered.
2. What is the quality control for your products?
Answer: All of our production are in lines of API rules and ISO9001:2015 strictly, from signing contract , to raw materials, to each production processes, to product finish, to after-sale service, each processes and sections are in accordant with standard.
3. About lead time,payment terms, delivery ?
Answer: We always have regular models available in stock, prompt delivery is one of our advantages. Mass production depends on quantity of order.
We accept all regular payment terms including L/C, T/T, etc.
We are near from Beijing airport and Tianjin(Xingang) seaport, transportation from our factory to Beijing or Tianjin only takes one day, fast and very economical inland charges.
4. What is the history of Far Eastern ?
Answer: The drilling bits business was started at year 2003 only for China domestic requirement, the name Far Eastern was started from year 2009, now Far Eastern has exported to more than 35 countries and areas.
5. Do you have Referenced Letters /Recommendation Letters from old customers?
Answer: Yes, we have many referenced letters/recommendation letters issued by old customers who would like to share our stories.
