Audited Supplier
DFC could comply with ASME code, TEMA standard to design and manufacture heat exchangers for petrochemical, fertilizer,coal chemical, power plant, steel industries. The material could be stainless steel, titanium,carbon steel,duplex steel. DFC has large lathes for fabricating heat exchangers and also CNC maching centers,CNC tube-tube plate automatic welding maching. ensure to complete the heat exchanger processing and manufacturing in accordance with the technical requirement of the drawing.
| Design Standard | ASME/PED | Diameter | 500-3000mm |
| Design pressure | As code | Vessel type | Horizontal/vertical |
| TPI | YES/as required | Raw material | SA516-70 or required |
| Application | Water treatment/petrochemical | Packing | Transport saddle |
DFC is equipped with hardware facilities for the production of large heat exchangers, and has completed the design and manufacture of thousands of floating head, tube and U-tube heat exchangers
DFC can make the heat exchanger of composite tube plate with material is SA266 Gr.2 + 304, SA266Gr.2 + 316L, SA266 Gr.2 + TA2, SA266 Gr.2 + 2205, SA266 Gr.2 + 8825. The following equipment is titanium Cladding tubesheet made for the Iran project, and titanium Cladding flange, and Cladding blind flange.
DFCTANK has packing and shipping procedure, and also could strictly follow customer's specific requirement.
DFC Pressure Vessel Manufacture Co., Ltd was founded in 1984, DFC has richful manufacturing technology and production experience in the field of pressure vessels, can produce stainless steel, carbon steel, titanium, copper,nickle-based alloy, composite plate material pressure vessels with an annual capacity of about 12,000 tons.
Our products are widely used in various industries including petroleum, chemical, chemical fertilizer, pharmaceutical, water treatment and so on. The products were exported to the United States, Russia, Canada, Preu, Belgium, Costa Rica, Saudi Arabia, Switzerland, Sweden, South Korea, Japan, Malaysia, Philippines, Indonesia, Sudan, Turkmenistan, Niger, Chad and so on, won the praise of domestic and foreign customers.
DFC have has extensive experience in complying with PED (97/23/EC), CUTR, DOSH and CRN requirements. DFC is familiar with domestic and international norms and standards such as: ASME Code Section VIII Div.1, CUTR, AS1210, EN13445, TEMA, AP1650, PD5500, GB150, GB151 and JB4710.
DFC has established long-term cooperation with the third party inspection company such as: TUV, BV, DNV, ABS, CSEI, CCSI, SGS, Moody, and TYPSA who help us to ensure that all raw materials, fabrication procedures and final products are in accordance with our customers' requirements.
For more information about heat exchanger or part of heat exchanger, please contact:
Maisie Ma
DFC Pressure Vessel Manufacture Co., Ltd.
