Audited Supplier
DX51D+Z, DX52D+Z, DX53D+Z
Steel Plate
ASTM, AISI, GB, JIS, DIN, BS
ISO
Galvanized
Hot Rolled
Ship Plate, Boiler Plate, Container Plate, Flange Plate
High-strength Steel Plate
Stock
0.18-3.0mm
Dingang/OEM
Seaworthy Packing, Export Standard
ASTM, GB, JIS
Jiangsu, China(Mainland)
72104900
Product Description
Profile
It is the equipment that applies zinc plating by dipping a sheet of hot-rolled steel into a molten zinc pot so as to be coated with zinc deposits.
Steel grade: Steel grade: SGCC SGCD or DX51/52/53/54D+Z
Thickness: 0.18-3.0mm
Width: 1000mm, 1200mm, 1250mm (The special width 914mm, 1219mm, 1220mm will be available )
Surface Finish: Regular Spangle, Minimized Spangle
Coating Thickness; Min. Single Side coating Thickness: 50 g/sqm
Max. Single Side coating Thickness: 275 g/sqm
Surface Treatment: Chromating Treatment, Oiled
Inside diameters: 508 mm
Outside diameter: According to the weight of coil
Weight/coil: 3-8 ton
Packing condition: Seaworthy
Packing weight(without pallet): 25 kgs
Packing weight(with pallet ): 55 kgs
Productivity: 300, 000 tons/year
It is the equipment that applies zinc plating by dipping a sheet of hot-rolled steel into a molten zinc pot so as to be coated with zinc deposits.
Steel grade: Steel grade: SGCC SGCD or DX51/52/53/54D+Z
Thickness: 0.18-3.0mm
Width: 1000mm, 1200mm, 1250mm (The special width 914mm, 1219mm, 1220mm will be available )
Surface Finish: Regular Spangle, Minimized Spangle
Coating Thickness; Min. Single Side coating Thickness: 50 g/sqm
Max. Single Side coating Thickness: 275 g/sqm
Surface Treatment: Chromating Treatment, Oiled
Inside diameters: 508 mm
Outside diameter: According to the weight of coil
Weight/coil: 3-8 ton
Packing condition: Seaworthy
Packing weight(without pallet): 25 kgs
Packing weight(with pallet ): 55 kgs
Productivity: 300, 000 tons/year
| Base metal | steel grade | Chemical constitution (heat analysis)% | |||||||
| C less than | Si less than | Mn less than | P less than | S less than | Alt less than | Ti less than | Nb less than | ||
| Cold rolled base metal | DX51D+Z | 0.1 | 0.3 | 0.5 | 0.035 | 0.035 | - | - | - |
| DX52D+Z | 0.08 | - | 0.45 | 0.03 | 0.03 | - | - | - | |
| DX53D+Z | 0.08 | - | 0.4 | 0.03 | 0.03 | - | - | - | |
| DX54D+Z | 0.01 | 0.1 | 0.3 | 0.025 | 0.02 | 0.015 | 0.1 | - | |
| DX55D+Z | 0.01 | 0.1 | 0.3 | 0.025 | 0.02 | 0.015 | 0.1 | 0.1 | |
