Audited Supplier
XP-2
Online Training, Reply Customer's Question in 12h
12 Months
<500mm
<900kg
Material Testing Machine
<1000KN
0.5
Electronic Load
Dynamic Load
Digital
Manual Control
0-100Kg
AC220V
Under
ASTM D2843 Exit Sign Smoke Test Exit Sign Tester
ASTM D2843
Measure Smoke Density of Material During Burning
Building Materials
Automatic, Computer Control Smoke Density Tester
Incandescent Lamp
Silicon Photodiode
Supplied
800 mm (W) X 500 mm (D) X 1000 mm (H)
Fume Hood
220V, 50Hz
English
Yes
by Air
in One Plywood Case
Delta
Exit Sign Tester Is Packed in Veneer Case.
80cm * 50cm * 100cm
China Mainland
9031809090
Product Description
XP-2 ASTM D2843 Building Material Burning Smoke Testing Exit Sign Tester
Functions of test software:
XP-2 ASTM D2843 Building Material Burning Smoke Testing Exit Sign Tester is designed and manufactured in accordance with ASTM D2843 standard , it is mainly for building products testing.
By detecting the loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during test
| No. | Item Name | XP-2 ASTM D2843 Building Material Burning Smoke Testing Exit Sign Tester |
| 1 | Dimension | 800 mm (W) x 500 mm (D) x 1000 mm (H) |
| 2 | Weight | 35kg (computer is not included) |
| 3 | Power supply | 220V, 10A, 50Hz |
| 4 | Ambient temperature | 10 ~ 35 Centigrade |
| 5 | Installation place | Fume hood |
- The test chamber is Teflon coating, to resist the corrosion of smoke released during burning.
- Light source is incandescent lamp, the photoelectric sensor is silicon photodiode, which has cosine calibration function.
- Color filter is equipped to filter out ultraviolet light and infrared light.
- Gas pressure of main burner is 256KPA, it is subjected to flame impact on test specimen.
- Gas pressure of auxiliary burner is 138KPA, it can continue burn the molten droplets.
- The computer and test software are equipped.
Functions of test software:
- XP-2 ASTM D2843 Building Material Burning Smoke Testing Exit Sign Tester can display the transmittance value of each 15s optical path, and can also draw the transmittance test curve. After test, the software can display the SDR smoke density value, that is, the smoke integral value;
- Through the test software, it can synthesize test reports of three sets of test samples to draw a SDR smoke density development curve.
- You can use the software to compare the three test results to judge whether the test results are ok.
- Connecting with a printer, the test results can be printed.
