Audited Supplier
1
Steel
Surface Cleaning
Surface Deburring
Artificial Abrasives
Abrasive
Superabrasive
DX Blast
China
Product Description
The softness of zinc shot is suitable for operation in deburring die castings, and removing impregnated sand from sand castings.
It can remove coatings from soft alloy cast parts without damage, and leaves a thin film of zinc on the work pieces which provide corrosion resistance.
It is widely used in surface blasting treatment of various products such as aluminum and zinc die-casting parts.
Application | Features |
Blast cleaning : Use for blast cleaning of steel board. H type steel, steel pipe and all kinds of steel material, casting, die-casting, gorging, glass surface for industries of steel structure, construction, bridge, shipbuilding, pipes, container, locomotive, engineering machinery, automobile, casting, forging, glass, comodity. Shot peening : Used for shot peening of spring, shaft, gear, connecting bar, blade, chain, crank, wheel spares for industries of automobile, locomotive, ship, plain, machine. | 1. Made from high quality raw materials and advanced technology, it has a very high quality standard, with a tight structure, uniform grains and a bright silvery white appearance. 2.The high specific gravity of zinc and its low hardness allow for the removal of burrs without abrading the surface of the product, resulting in high processing quality. 3. Widely used, it can be applied in the automotive, aircraft, shipbuilding and other industries. 4. High safety and significant whitening effect on the surface of the workpiece. |
PRODUCT PARAMETER
Density:7.1g/cm3
Hardness:35-55HV
Size:0.6mm-3.0mm
Chemical composition:Zn:99.99% Fe:0.004% Al:0.003% Cu:0.001% Co:0.002%
Equivalent Shot Sizes | ||
Cut-wire Size (Inches) | Cut-wire Shot Size(mm) | Cast steel Shot Size |
0.012 | 0.30 | S-70 |
0.017/0.018 | 0.40/0.45 | S-110 |
0.020/0.023 | 0.50/0.60 | S-170 |
0.028 | 0.70 | S-230 |
0.032/0.035 | 0.80/0.90 | S-280 |
0.035/0.041 | 0.90/1.00 | S-330 |
0.041/0.047 | 1.00/1.20 | S-390 |
0.054 | 1.40 | S-460 |
0.062 | 1.60 | S-550 |
0.080 | 2.00 | S-660 |
0.090 | 2.30 | S-780 |
0.126 | 3.20 | S-1110 |
Type | Si | Cu | Mn | Mg | Ai |
1070 | 0.2 | 0.04 | 0.03 | 0.03 | 99.7% |
5056 | 0.3 | 0.1 | 0.05-0.2 | 4.5-5.6 | remainder |
DX BLAST Co., Ltd., with 30 years development, is a professional manufacturer of shot blasting machines and shot peening machines.
DX BLAST, distribution network consists of sales agents from many countries as Poland. Mexico. UAE. Saudi Arabia. Malaysia, Vietnam. Philippines, Pakistan, Indonesia.
